We have a Kenmore Elite model 1772990. The glasses are very cloudy when they finish washing and if you do not scrub the dishes before putting them in the diswasher they come out with the old food on them.
Any ideas on what to do to fix this?
the problem is hard water. go to www.dishwasherfilter.com. they have a product for this problem. it filters the hard water going into your dishwasher and leaves your dishes spot free every time. it is very affordable and guaranteed to solve your problem.
Glasses and dishes are not clean, especially upper tray, can i check for any blockage. Not enough power spray on upper chopper. Removed chopper looked clear.
Clyde
My Clean Light was flashing, so I reset the dishwasher as mentioned. When I did the next wash, the...
(More)
My Clean Light was flashing, so I reset the dishwasher as mentioned. When I did the next wash, the sensor light didn't come on with the wash cycle. The the wash cycle continued for several hours (2+ hours), before I decided to cancel the wash cycle. What could be the problem?
kenmore 655.13222 k601 bought 5 months ago after insalation machine stops and clean light comes on...
(More)
kenmore 655.13222 k601 bought 5 months ago after insalation machine stops and clean light comes on flashing. had a repair man in changed circut board. month later of same issues told us the drain was not connected properly. today had a service man in and a wire was off to the element. now it runs a full cycle. what i would like to know is how long should all the cycles be if set to normal or fast etc. and when heated dry is selected should dished be fully dry . cause on normal - with heated dry turned on - everything is still wet like machine just turned off nore do the modes on the dishwasher change ie light stays on for normal clean but never lights up at rinse or drying just normal to clean? any one any ideas?