Question about Saeco Vienna SuperAutomatica Coffee Maker/Espresso Machine

2 Answers

Vienna superautomactica found a spring

Machine only spit out a very small amount of coffee, turned off, when trying to get the brew group out, it was stuck, with a little jimmying, i got it out and a spring fell from somewhere, got all cleaned out but the bean light continues to blink, it must be the spring, any ideas where it goes?

thank you sincerely, in advance for any help

diane

Posted by on

  • dianemcmulle Jan 31, 2009

    here is a picture:



  • Mirko Blas
    Mirko Blas May 11, 2010

    Hi Diane,

    Have you a picture on the spring, if i can see the spring then i can tell you where it should be.

    Best regards
    /Mirran


×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Hi,

That spring can fit in many places:-(

I put a blowprint of the brewingunit here.

vienna superautomactica found a spring - de174b0.jpg

Posted on Feb 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The spring is most likely from the door that spills the ground into the brew group. Take the brew group out. The door is in the top right side of the space. The spring shuts the door when grinding and it should be closed when the brew group comes out. The door opens only when the ejecting the grounds into the brew group.

Posted on Feb 02, 2009

  • vlught1955 Feb 02, 2009

    Sorry didn't see the picture - that spring looks like it comes from under the center grind blade - it's one of three

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor that moves brewing group started moving very slowly. it can make it on time to make coffee. Anyone know what could the problem be? Mashine worked great just untill today.


Hi, I had the same problem. The motor ran too slow because it did not receive the adequate amount of power. The power is handled by a small part on the circuit board. I replaced it by a part I bought on ebay called Transistor BD245C (or TIP 33C). Now it's working perfect again :-) Details can be found on ebay by typing '262197092158' in the search box. Although the page is in German, it has several pictures that make clear which part is meant. Good luck!

Feb 06, 2016 | Saeco Vienna SuperAutomatica Coffee...

2 Answers

Not all coffee dispenses from BrewGroup: Last week almost nothing was being dispensed and coffee was detouring to grounds box. I cleaned the brew group-- removed and cleaned the spigot (including the...


I believe based on symptoms you described, that it is most likely just a good descaling cleaning it needs, try using CLR, OR some vinegar and water, run this through machine a few times, you can even use denture cleaner. I don't think it is your pump based on your symptoms.

Jun 13, 2011 | Saeco Vienna De Luxe Espresso Machine

1 Answer

I cant take out the brew group of my saeco vienna espresso machine


have to make sure the group is in part. turn machine off and on should hear the motor go. if the group is stuck take the small screw out of group and will release piece thats on the injector. MUst hold the lever on the front of the group to relase the lock then gently pry it out .

Dec 12, 2009 | Saeco Vienna De Luxe Espresso Machine

1 Answer

Is my "brew group" broken.


Remove the brew unit, under the white plastic valve you will notice a small chamber that might be filled with coffee grounds and water. Clean chamber.

Dec 01, 2009 | Saeco Vienna De Luxe Espresso Machine

1 Answer

Saeco Vienna grinds too much coffee.


Hi
If you have the Delux or Digital there are 2 knobs in the bean hopper. Turn the small knob back 1 mark and see if that will help.

Jul 12, 2009 | Saeco Vienna De Luxe Espresso Machine

1 Answer

Grind settings


The factory setting should be 8. The higher numbers are finer. The + and - knob is the doser amount, the amount of coffee in a shot dose. Average is 7 gm, the middle. The highest is 14, I think. Generally, the highest dose shouldn't be used consistently because it can cause stress on the brew group. Just brew two shots.

Apr 17, 2009 | Saeco Vienna De Luxe Espresso Machine

2 Answers

Saeco Vienna gear jammed


This has happened to me. If the problem is the brew group gear is in the wrong position, you can manipulate the brew group until it matches up with the drive gear in the machine. You'll know it matches if you can insert the brew group back in the machine full until it clicks.

Nov 07, 2007 | Saeco Vienna SuperAutomatica Coffee...

Not finding what you are looking for?
Saeco Vienna SuperAutomatica Coffee Maker/Espresso Machine Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Ray Murphy

Level 2 Expert

67 Answers

eyecam

Level 2 Expert

86 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...