Question about Denon AVR-2800 Receiver

1 Answer

Denon AVR-2800 My unit shows power, but won't turn on at the power button or at the romote. Please help

Posted by on

  • Shala Geraci Jul 31, 2007

    Thank you for your attempt in helping but that didn't work.I unattached everything and re-wired. I checked all cables and nothing seemed amiss. Pleas sugest other ideas f howto reset it or how to get it off of protection mode. Thanks

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 60 Answers

Hi, This is because your unit goes in to protection mode because of some bad connection in the input/output section .Disconnect your spkrs,inputs..turn the volume is Down all the way and power it up,Check your wiring for shorts at the inputs and outputs. at your service sreejith

Posted on Jul 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset factory settings of my Denon avr 2800


From Denon support:
To reboot, turn receiver off using the small on/off button, not the big standby button. While off press the night and pure direct button at the same time and keep holding them with your right hand while pressing the small on/off button with your left. You will see your receiver menu flash. When you see it flash let go of the night and pure direct button and the receiver will reset it self to the radio station 87.50. The receiver's microprocessor has now been set back to factory default.

Sep 08, 2013 | Denon AVR-2800 Receiver

1 Answer

Reset factory settings on my devon avr 2800


From Denon support:
To reboot, turn the receiver off using the small on/off button, not the big standby button. While off press the night and pure direct button at the same time and keep holding them with your right hand while pressing the small on/off button with your left. You will see your receiver menu flash. When you see it flash let go of the night and pure direct button and the receiver will reset it self to the radio station 87.50. The receiver's microprocessor has now been set back to factory settings.

Sep 08, 2013 | Denon AVR-2800 Receiver

1 Answer

Requires operator manuel


You can download the manual on the link below. Just click on the PDF.

http://safemanuals.com/user-guide-instructions-owner-manual/DENON/AVR-2800-_E


Good Luck and please rate 4 thumbs up for the free answer

Apr 29, 2010 | Denon AVR-2800 Receiver

1 Answer

When Denon AVR-5803 Is powered on, it's making a clicking sound


Some of these unit have a dimmer for the display however this doesn't sound like your problem, I sure your unit is going bad. needs repair

Jan 24, 2009 | Denon AVR-5803 Receiver

1 Answer

Dennon avr-2800 Remote problems??


Unplug unit for 24 hours or if there is a reset button on back panel -- press and hold for ten seconds

Apr 21, 2008 | Denon AVR-2800 Receiver

1 Answer

Denon AVR-2800


I'm having the same problem.

Jul 31, 2007 | Denon AVR-2800 Receiver

1 Answer

AVR-2800


Unplug for 24 hours then try again

Jul 31, 2007 | Denon AVR-2800 Receiver

2 Answers

My unit has power, but it won't turn on at all.


This means that something is seriously wrong with the unit(blown amp, shorts, opens, etc.) however, you can reset the unit by unplugging the unit, holding the A and B channel buttons on the face of the unit and plugging in the reciever. the display should flash at 1 second intervals. if it doesn't stop flashing on its own then unplug and replug and you should be good to go! good luck.

Jul 31, 2007 | Denon AVR-2800 Receiver

Not finding what you are looking for?
Denon AVR-2800 Receiver Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75767 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...