Question about Maytag MAH6700AWW Neptune Front-Load Washer

2 Answers

How to fix the LO error code on Maytag Neptune front load washer

I need assists on how to fix a LO error code on a Maytag Neptune front load washer. I will continue to click like its trying to lock but never does. It was in mid cycle and just stopped.
help please

Posted by on

  • 1 more comment 
  • sksnow Mar 02, 2009

    I thought my washer had completed its cycle because the door was unlocked and the appropriate time had passed. The clothes were not sitting in water, and it appeared that the spin cycle had completed. Hence, they were removed from the tub.

    I closed the door, and the machine began protesting with a strange noise. Then, the LO error code lighted. I pressed the pad to turn off all controls and closed the door. Eventually, the noise stopped.

    This morning, when dirty clothes were again put into the washer tub, the noise re-occurred and of course, the light went on.

    Is there anything I, as a consumer, can do at my end? Or, need I call Sears repair service?

    Mrs. CBS

  • Anonymous Mar 13, 2009

    LO is appearing on the screen and load will stop mid spin or rinse cycle. Is there a fix i can do myself?

  • boriley11 May 11, 2010

    Lo means that the door is not locked. according to my manual, you should use the power off pad to turn the washer off. Then, turn it back on using any of the pad. If it reappears,(he bad news) call the service man.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 50 Answers

Not really bad news. The unit requires a door lock assembly.

Posted on Feb 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What does the F1 error code on a Maytag Steam Dryer mean please?

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eratic, sometimes door lock doesnt activate, when it does wahser starts but stop mid cycle and wont continue. Replaced door switch and pump


Repair needed on Maytag Neptune washer - Home Improvement ...

www.dslreports.com > ... > Home Improvement

DSLReports
Aug 5, 2007 - 19 posts - ‎8 authors
Forum discussion: We have a Maytag Neptune front-loader washing machine that ...the drain/spin cycle after a wash even though the timer continues to ... related circuit board failure" their Neptune washer will lock the door, turn on the ... then will either not start tumbling or will stop operation mid-spin cycle.

How To Fix A Washing Machine That Is Not Spinning or ...

removeandreplace.com/.../washing-machine-or-washer-dryer-is-not-spin...
May 13, 2013 - The absolute first thing to do to your washing machine that will notspin or drain (whether it. ... I was so fed up with the machine sometimes refusing to spin or drain the .... I just did a load and it stopped midcycle with e and f error codes.... I tried different cycles but all that happens is the door lock engages ...

Maytag Washer Troubleshooting - YouTube



Dec 02, 2015 | Maytag Washing Machines

1 Answer

Error code od maytag Neptune


http://homeguides.sfgate.com/maytag-neptune-washer-model-mah8700-troubleshooting-codes-102595.html. Here's the site for Maytag Neptune Washers. You can also find other modes there. Hope this helps. Enjoy.

Sep 30, 2014 | Maytag MAH6500 Neptune Front Loading...

1 Answer

Error code FL-maytag neptune front load washer won't lock


replace door latch (fl = faulty latch ) good luck APPLIANCES R EN

Mar 09, 2013 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I s a Maytag Neptune washer error code "FL" something I can reset myself?


Error on the door lock or the door switch, try and use a switch cleaner, remove and reset the lock or check the harness to the switch
click this link: Door lock

Jan 20, 2013 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

What does the code od mean?


The "od" code appears when you must open the washer door. The Maytag Neptune washer requires that you open the door between cycles.

Read more: Maytag Neptune Washer Error Codes ' eHow.com http://www.ehow.com/list_7170826_maytag-neptune-washer-error-codes.html#ixzz2GZKry68n

Dec 30, 2012 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

How do you fix the maytag neptune pf code for the dryer??


Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Apr 13, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I have a Maytag Neptune TL washing machine, it runs almost all the way through they cycle but on the last spin cycle it stops and the digital display shows LO. Can you help me?


LO error code:

Locked: Lid has failed to unlock -

the machine has repeatedly tried to

unlock the lid. Push lid closed to

make sure nothing from the inside is

pressing against the lid, preventing

unlocking.

Is that the issue? Have the Lid locks failed to release and you can't open the Lid?

Or have the Lid Locks released so you can open the washer lid but the error code LO remains?

If you want to DIY I will help you.

Google this Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum no cost and you can get the Service Manual from this site.

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues with the machine.

In that Sticky are other what I find to be common Service Repair notes for issues with the machine.

If you need help post in the Maytag/Magic Chef/Admiral/Jenn-Air forum with your issue and we will try to help. No cost to you for the support..........D*ick

Mar 03, 2011 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

If you get the FL how do you get the door to open??


  1. Your Maytag Neptune washing machine displays error codes, also called "help codes," to identify specific problems with your washer. Once you close your Maytag Neptune's door, the machine locks the door, goes through the selected wash cycles and unlocks the door when the laundry is finished. Error codes appear when there are problems with the door, the inflow and drainage of water and the motor.
  2. Do
  3. Your Maytag Neptune washer displays the "do" help code when the washing machine is trying to start a cycle, but the door is open or not locked properly. If this message is displayed, close the door securely and restart the washing cycle.
  4. FL
  5. The "FL" code indicates that the washing machine was unable to lock the door after you closed it. Open and close the door tightly, then restart the washing cycle.
  6. Sd
  7. The "Sd" code indicates that you have added too much detergent to the washing machine and your laundry has too many suds. The machine will stop displaying this code if it has successfully run the suds recovery cycle, which removes the excess suds from the wash load. If the code remains, reduce the amount of detergent in the load. Use less detergent for similar loads of laundry in the future.
  8. PF
  9. The "PF" code indicates that a power failure has occurred. Restart the wash cycle. If the code still appears, check that the washing machine is still plugged in to the electrical outlet.
  10. Nd
  11. The "nd" code indicates that your Maytag Neptune is not draining as it should. Check that the drain hose isn't kinked and that the stand pipe isn't clogged. If you find either of these problems, fix them before restarting the washing cycle.
  12. LO
  13. The "LO" code appears when the washing machine has finished the selected wash cycle, but cannot unlock the door. Verify that the door is closed properly, push the "Off" button, and wait two minutes. The door should unlock and the error code will disappear. If the error code remains, unplug the washing machine, wait two minutes and plug it back into the electrical outlet.
  14. Lr
  15. The "Lr" code indicates that the washing machine's motor is not running as it should. Have your Maytag Neptune washing machine serviced by a certified Maytag repair professional.

Dec 06, 2010 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Maytag neptune error code lr


i think this one is the one with the clutch. if it does it b4 it spins. put it on a spin. if it doesnt spin, u need a clutch. under the unit the belt is whapped on it

Feb 12, 2010 | Maytag Neptune MAH6500A Front Load Washer

Not finding what you are looking for?
Maytag MAH6700AWW Neptune Front-Load Washer Logo

1,614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...