Car code how do i enter it

Some camshaft sensors must be installed AND adjusted. More likely there is also a crankshaft position sensor which is more likely to have caused your problem. You need to but an inexpensive shop manual for your car from any parts store. Also double check the error code. I believe your car has variable cam timing such that a failure in that system can set the code even if the sensor is good. Is it possible your timing belt (or chain) may have failed?

Cam belts are due every 120,000km on peugeots. You should be fine for quite a while.

try to get the Haynes Manual for your car as is more helpful.

Get the code checked
remove the radio from the dashboard.
Then post ALL the letters+numbers on any labels,barcodes or stamped in the metal casing.

check with peugeot or it will be on ure previouse rego papers if you still have them

The ignition key may be defective or in need of a battery to generate the code needed to disarm the immobilizer. Hope this helps!

it will be your low volume pump in the tank

head gasket seems to be broken

loosen the alternator bolts and lever the alternator away from the engine and retighten. always leave a bit of free play