Question about liftmaster Chamberlain Garage Door Opener Transmitter 300MC

1 Answer

My chamberlain listmaster elite series seems to have locked

The lighted display is off, and I can't open the garage door from the wall switch nor from the in-car button. And I can't budge the garage door. Seems to be locked, even when I pull on the red rope thing. Any ideas for how to turn it back on or get it open manually?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

Make sure the power is on to the opener, plug something else into this outlet if not then check for a tripped circuit breaker at your main power panel. if yes wait a couple minutes then plug it back in and try it. also check for a reset button on the rear and make sure it is depressed. to open manually have someone put downward pressue on the door while you pull the rope down and forward.

Posted on Feb 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Liftmaster garage door goes up and down on its own?


Liftmaster garage door goes up and down on its own when i open it

Jan 05, 2012 | liftmaster Chamberlain Garage Door Opener...

1 Answer

My garage door wanted open, there is not green light on the pad anymore the ele power is on


YOU MAY AVE LOCKED OUT THE REMOTES

IF THE GREEN LIGHT ON THE WALL CONTROL BLINKS PRESS THE LOCK BUTTON TO UNLOCK.

IF THERE IS NO LIGHT CHECK THE LOW VOLTAGE WIRING (A STAPLE CAN SHORT THRU THE INSULATION AND CAUSE ALL KINDS OF PROBLEMS).

HOPE THIS HELPS

Jan 22, 2011 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Green senor light blinks on and off. Can only open garage from wall opener . There is no senor blockage.


WHAT GREEN SENSOR LIGHT ARE YOU REFERING TO.

IF YOU MEAN THE WALL BUTTON LIGHT - THAT WOULD TELL YOU THET THE LOCK BUTTON IS ACTIVATED LOCKING OUT ALL RADIO CONTROLS - PRESS & HOLD THE LOCK BUTTON FOR 3 SECONDS THAT WILL TURN OFF THE LOCK FEATURE - PROBLEM SOLVED.

IF YOU MEAN THE GREEN LIGHT ON THE SAFETY EYE - CHECK THE WIRING IT COULD BE A BROKEN WIRE OR REVERSED POLARITY - ALSO BE SURE THE UNITS ARE PROPERLY AIMED AT EACH OTHER.

HOPE THIS HELPS

Nov 09, 2010 | liftmaster Chamberlain Garage Door Opener...

1 Answer

I came home today and my liftmaster garage door opener does not work. I checked 3 other remotes and none of them work. The button on the wall inside the garage works fine. I tried to reprogram one of...


CHECK TO SEE OF THE LED IN THE WALL CONTROL IS FLASHING. IF IT IS PRESS THE LOCK BUTTON FOR ABOUT 2 SECONDS & RELEASE. THIS BUTTON IS USED AS A VACATION LOCK OUT FOR ALL THE REMOTES AND MAY HAVE BEEN PRESSED BY ACCIDENT.

Aug 11, 2010 | liftmaster Chamberlain Garage Door Opener...

2 Answers

Cant open front of wall opener controll to replace Unit has large white square to open and close door plus a light and lock switch. Unit goes to lock each time we use the remote or wall...


You can insert a flathead screw driver in the side of the whote push button and pop it out. These are polarized so watch the terminals colors. Thanks BB

Jun 19, 2010 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Just wall switch works transmitters won't light


You probably have the opener lock turned on. Press and hold the lock button on the wall button pad for four seconds. The green light will go solid instaed of flashing

Jun 14, 2010 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Remote and my keypad remote both stopped working as of today


CHECK TO SEE IF THE LED ON THE WALL BUTTON IS BLINKING - IF IT IS SOMEONE HAS PUSHED THE VACATION LOCK BUTTON.
PRESS THE LOCK BUTTON TO MAKE THE LED STAY CONSTANT AND IT IS FIXED.
HOPE THIS HELPS

Nov 17, 2009 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Unable to program remotes from opener


TRY UNPLUGING THE UNIT WAIT ABOUT 5 MIN. PLUG IT BACK IN CLEAR THE CODES BY HODING DOWN THE PROGRAM BUTTON FOR ABOUT 20 SECONDS.

NOW YOU ARE READY TO PROGRAM A REMOTE TO THE SYSTEM.

HOPE THIS HELPS

Aug 13, 2009 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Door opner stops/appears to lose power


How old is your unit. I need to know this it sounds like a Circuit Board problem. but would have to know how old your unit is.

Apr 13, 2009 | liftmaster Chamberlain Garage Door Opener...

Not finding what you are looking for?
liftmaster Chamberlain Garage Door Opener Transmitter 300MC Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top liftmaster Electrical Supplies Experts

Mike

Level 3 Expert

4332 Answers

Gil Shultz

Level 3 Expert

3320 Answers

ray gallant

Level 3 Expert

37696 Answers

Are you a liftmaster Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...