Question about Navigon 2100 Portable GPS Receiver

1 Answer

Mn6.exe error joyoel@yahoo.com

Posted by on

  • Anonymous Feb 06, 2009

    sUDENLY A FATAL APPLICATION ERROR NOTICE APPEARED ON THE SCREEN AND I CANT GET RID OF IT. APPLICATION mn6.exe apparently performed an illegal operation of some type and froze everything. what do I do?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like the data on the sd card is corrupted.
You have to reload all data on the card,everything is on the navigon website,sorry i don't have the link).
You have to register before you can use their site.
Process is slow so be patient.
You should also format the sd card before reloading the data ( FAT,not FAT32).
process goes a little faster if you use a card reader.
good luck

Posted on Feb 06, 2009

  • MikeB55 Feb 15, 2009

    One other thing to check....make sure battery is fully charged

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rand mcnally 710 navi.exe has encountered error


go on lione and do the back up anbd reset to factgory setting it should be ok

Mar 05, 2013 | Rand Mcnally TND 710 GPS Receiver

3 Answers

Fatal application error


methinks you are in firmware update territory...go to that site, and enter model number, and re download the firmware.

Mar 15, 2008 | Fine Digital FineDrive 400 GPS Receiver

2 Answers

Application MN6.exe has performed and illegal operation and will be shut down program: mn6.exe eception :0xc0000005 adress:00000000


Hello,
this is a very common problem with this unit.
What version do you have on your Mio Moov?
I have that error when I run the 2100 version on my Mio Moov. I can run the 7200 software without a problem...
Give it a trial.
Regards.

Jun 13, 2011 | Navigon 2120 GPS Receiver

3 Answers

My Navigon 7100 no longer speaks the street names after I downloaded the latest software updates.


I had the same problem and this fixed it: Connect the navigon to your computer and go into the files directory and create 3 new empty folders, as follows: (You may want to back up your navigon 1st) After i created these empty folders, I was able to go into settings and turn Stree names on

Create these empty folders within MN6\sound folder.
Celine_67_tts
Isabela_22_tts
Sarah_21_tts

May 13, 2010 | Navigon 7100 GPS Navigator GPS Receiver

1 Answer

Navigon 2100 mn6.exe fatal error message....going through update with card reader through navigon site didn't work...asme message. machine works. it seems to be card. how do I fix this or get a new...


I got mine back up and working by doing the following:
1st Icopied the files on the SD Card to my pc (for backup)
2nd I deleted all the files on the SD Card
3rd I went to the following link https://www.navigon.com/site/us/en/my_navigon/unauthorized/products_us

and download the update for Navigon 2100 and installed it.

Tested it and it no longer gives me the fatal error.

Jan 07, 2010 | GPS Devices

1 Answer

The MN6.exe fatal Application error is displayed all the time and I am unable to use the Navigon 2100 GPS


push the reset button on the side of the system (a paperclip works well for this). Also, remove the card and put in again. If this doesn't work go to Navigons website and make sure you've downloaded all the software updates. Make sure your unit is fully charged as well. Don't waste your time emailing Navigon's CS online help....I attempted to contact them on 3 separate occassions and never got a response. Good luck. Hope one of my work-arounds helps you.

Dec 20, 2009 | Navigon 2100 Portable GPS Receiver

2 Answers

I've had my Navigon 7100 GPS for 2 weeks now, little use, and today I got the fatal application error that MN6.exe was going to shut down. I have seen forums on this issue but nothing recent. The unit will...


I solved this problem.

The backup is just a copy of the files on the SD card. I made one a couple of months ago when everything was working ok. I tried to erase the SD card so I could restore the backup manually. I ran into an error with a SD card file that wouldn't erase. I ended up formatting the SD card then copying the old backup files to it. That took care of the problem and now the Navigon works the way it's supposed to.

Jan 21, 2009 | Navigon 7100 GPS Navigator GPS Receiver

1 Answer

My gps has a fatal application error. Program: MN6.exe Exception: 0xC0000005 address: 002B2110 a


I have application mn6.exe has performed an illegal operation ... on my screen. The system won't go past this

Jan 03, 2009 | GPS Devices

1 Answer

Navigon GPS


if your sd card is OK, there should be an update program on it, you have to go to windows ce on the unit to run this program. to do this hold the bottom right key while booting...

Jul 20, 2008 | Fine Digital FineDrive 400 GPS Receiver

1 Answer

FineDrive 400 : IntelliApp.exe failed


got that once, had to reload the firmware, if you write me at vince954@yahoo.com I can send you the files or you can send me a dvd and burn the latest files and maps on it for you.

Oct 17, 2007 | Fine Digital FineDrive 400 GPS Receiver

Not finding what you are looking for?
Navigon 2100 Portable GPS Receiver Logo

Related Topics:

2,309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navigon GPS Devices Experts

yadayada
yadayada

Level 3 Expert

60698 Answers

roedene

Level 1 Expert

9 Answers

Will Halftowaite

Level 3 Expert

503 Answers

Are you a Navigon GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...