Question about Adaptec (ASH-1233) (ASH1233) ATA Controller

1 Answer

I have Sony Vaio VGN-CS12GH which is windows vista loaded and i want to change in Windows Xp when i load Windows Xp there is no hard disk controller and i cannot load windows Xp. How to fix my problem, please can you help me?

Posted by on

  • Anonymous Feb 28, 2009

    I have Sony Vaio VGN-CS12GH which is windows vista loaded and i want to change in Windows Xp when i load Windows Xp there is no hard disk controller and i cannot load windows Xp. How to fix my problem, please can you help me?

  • rajnetha143 May 11, 2010

    I have Sony Vaio VGN-CS12GH which is windows vista loaded and i want to change in Windows Xp when i load Windows Xp there is no hard disk controller and i cannot load windows Xp. How to fix my problem, please can you help me? my laptop is shutdown automatically &it doesnt starts for few min.plz solve dis prblm

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 165 Answers

Your computer has a SATA hard drive. To install Windows Xp on it, your will have to Press "F6" when you start the installation process (You will get a prompt on the bottom of the screen to press F6 to install third party drivers). During this stage, you will need the SATA drivers on a floppy disk / CD.

To download the drivers, go to the following link.
http://www.sony-asia.com/support/download/284832

Posted on Mar 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

XTA-3310-CTRL-512M is password protected and I need to bypass it.


When you boot up to the log in screen type in administrator as user if you cant log in

During the boot up process you will see on the screen for a short amount of time a certain key to enter set up press and hold that key to enter set up BIOS scroll to set user password or supervisor password you can change or remove the password from there if you are still unable to change your password you might download

http://download.cnet.com/%7Bvalue=http://www.download.com/ubcd4win/3000-2086_4-10550208.html

UBCD4Win is a bootable "live" CD which contains software that allows you to change paswords repair/restore/diagnostic almost any computer problem also has a bios reset tool which remove your password and BIOS password although you will have to use a computer with an internet connection you will have to burn it to a disk as an iso then change your firtst boot device to cd During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart (note after you have removed the password you must go back and change the first boot device to your hard drive)


http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html


Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.
Data Recovery/Data Backup: Supports Logical scan and Raw scan, Supports NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660 file sytem, Supports IDE/SATA/USB Hard Drives.

Data Recovery - Recover your lost data
Available in Live CD to run offline
Recover accidentally deleted files in your hard drive
Recover data from RAW Drive(partition table or file system is damaged)
Support NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660
Support IDE/SATA/USB Hard Drives, memory cards, "
USB Memory Drives"

Drive Dumper - Backup your hard drive
Available in Live CD to run offline
Available to run on Windows
Support Windows 2K / XP / 2003 / Vista / 7 (Windows Editition)
For data rescue, backup, migration, or computer forensics etc.
Transfer important important data from damaged Drive(partition table or file system is damaged, has lots of bad data blocks)
Support NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660
Support IDE/SATA/USB Hard Drives, memory cards
, "USB Memory Drives"

Windows Password Cleaner
Available in Live CD to run offline
This is a utility to blank the password of any user that has a valid (local) account on your Windows system.
You do not need to know the old password to blank the password.
Support Windows NT/2k/XP/Vista
Support IDE/SATA/USB Hard Drives


Hope this helps


May 10, 2011 | Sun StoreEdge 3310 (xta-3310-ctrl-512m)...

1 Answer

Intel 82801G (1CH7)FAMILY ULTRA ATA STORAGE CONTROLLERS 27Di


Try FDISK in command prompt to:
  1. Clear the partition.
  2. Create a new partition.
  3. Format the partition.
After you've done that - try loading the Windows installer again and see what happens.

Please let me know if this helps. Good luck!

Mar 01, 2008 | Computers & Internet

1 Answer

I am trying to install win xp with sp2 on my laptop. i was using vista on it before . it show this error message; A problem has been detected and windows has been shut down to prevent damage to your...


If you want both OS you need to do a partition on the HD to proceed.IThat what i can figure from your quest.But if you just want XP just do a clean installation of it.

Perform a clean install of Windows XPA clean installation consists of removing all data from your hard disk by repartitioning and reformatting your hard disk and reinstalling the operating system and programs to an empty (clean) hard disk. For more information about important things to consider before you partition and format you hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click the following article number to view the article in the Microsoft Knowledge Base:313348  (http://support.microsoft.com/kb/313348/ ) How to partition and format a hard disk by using Windows XP Setup programTo perform a clean installation of Windows XP, follow these steps:
  1. Back up all important information before you perform a clean installation of Windows XP. Save the backup to an external location, such as a CD or external hard disk.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD drive or DVD drive, and then restart your computer.

    Note To boot from your Windows XP CD, the BIOS settings on your computer must be configured to do this.
  3. When you see the "Press any key to boot from CD" message, press any key to start the computer from the Windows XP CD.
  4. At the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft Software License Terms, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the Windows XP Setup.
If you have successfully installed Windows XP, you are finished. If these steps did not help you install Windows XP, go to the "Next Steps" section.

Oct 06, 2010 | Promise SATA300 TX2plus...

1 Answer

Hi, trying to install windows xp on an acer 5920g. After the installation cd asks you to hit the enter key to start the installation there is a complaint about not finding a hard drive to install to. I...


You do not need a hard disk controller driver. The hard disk is configured in the BIOS automatically.
If Windows install cannot detect the hard disk then either the hard disk is faulty or the motherboard disk controller is faulty.
Re-seat the hard disk, it may not be making proper electrical connection and then go to the BIOS configuration to see if it detects the hard disk, if not then the hard could be faulty or the disk controller is faulty. In most cases it is the hard disk that is faulty.
To further test the hard disk, remove the hard disk and connect it to an USB hard drive adapter, then plug it into a working computer's USB port. If this computer does not see it as an external hard drive or you cannot open the various folders and files, then the hard disk is definitely faulty.
Then you need to replace the faulty hard drive.

Feb 24, 2010 | Acer (91AD275018) SCSI Controller

1 Answer

I put 2 disks in raid 0 array on this controller


When you say "after merging the driver via a floppy at the txt setup" I think you are referring to pressing the F6 key to load the raid drivers. But I don't understand "restarting setup".
You will need the correct XP64bit drivers loaded on a floppy for this to work.
Maybe a good place to start is a temporary install of XP using 32bit drivers to prove all components are working.

Nov 01, 2009 | Adaptec 1220SA (2232100-R) Storage...

1 Answer

I cannot find a driver anywhere for my belkin f5u098 ide raid controller.


The drivers for this ATA Controller Card are resident in Windows, just like the Motherboard's onboard ATA/IDE Controller. If they don't autodetect and load make sure you are running at least Service Pack 2 for Windows XP and SP4 for Win 2000. Vista and later will have resident drivers.

Sep 23, 2009 | Belkin Ultra ATA/133 PCI (f5u098) ATA...

1 Answer

Need the graphic drivers for Sony Vaio VGN-CS12GH,vista


I have Sony Vaio VGN-CS12GH which is shutdown automatically......and it cannot start......plz solve this

Jun 04, 2009 | Adaptec (ASH-1233) (ASH1233) ATA...

1 Answer

Instal xp pro on sata drive


Either a) get your hands on an XP Pro SP2 CD, b) press F6 to load the proper SATA drivers when prompted (drivers located at: http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNFZ283BN&upd_id=2769&os_id=29), or c) build your own bootable XP Pro CD with the SATA drivers already slipstreamed into it by following the directions at http://maxeasyguide.blogspot.com/2008/04/preparations-for-winxp-installation-cd.html.

Apr 08, 2009 | Sony Computers & Internet

1 Answer

I have Window vista now and it would not load.


Get updated drivers for your storage control device from the manufacturer. Try Googleing (BrandName) + support.
TO see if they phave  a support website for you brand product.. 

Dec 28, 2008 | Computers & Internet

3 Answers

Sudden Hard Drive stop


Your hard drive may be intermittenly faulty, any abnormal sounds from a hard drive is not good. I would connect your hard drive to an USB adapter and plug it into a working computer's USB port and do a Disk cleanup and defrag, if possible run disk diagnostic program on the hard drive. If the hard drive proved OK then you may have a faulty IDE controller or faulty IDE cable, check the BIOS battery voltage, may need a new one.

Dec 02, 2008 | VIA (CX-VT6421A) (CX-VT6421A) IDE...

Not finding what you are looking for?
Adaptec (ASH-1233) (ASH1233) ATA Controller Logo

601 people viewed this question

Ask a Question

Usually answered in minutes!

Top Adaptec Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Robert Graf

Level 2 Expert

156 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you an Adaptec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...