Question about Kenwood KDC-322 CD Player

1 Answer

Kenwood KDC-322 cant get off code

I never had a code to get it off of the security.My alternater went out, I replaced it, then it blew the fuse on the radio. I fixed the fuse and now it will only say CODE. I cant figure out how to get it off code!! Frank

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 60 Answers

Hi, KENWOOD SECURITY CODE CLEAR procedure Your radio will require one of the following procedures. Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that ??? disappears). Then using your remote enter your code. Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear". Then using your remote enter your code. Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code. Enter your number from the remote control unit. Your code number is 5227 (KCAR) * Press numeric key ?5? ( 2 times ) and press the Track UP/Next Track key * Press numeric key ?2? ( 3 times ) and press the Track UP/Next Track key * Press numeric key ?2? ( 1 time ) and press the Track UP/Next Track key * Press numeric key ?7? ( 2 times ) and press the Track UP/Next Track key push buttom "track up" for 3 seconds The security is canceled and the set enters the TUNER mode! pls do give your ratings> sreejith

Posted on Jul 31, 2007

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a code for the kdc 322 kenwood


There is no general code, thieves would have a hayday if there was one, serial no, model no and contact manufacturer, they may ask for proff of ownership or receipt

May 24, 2010 | Kenwood KDC-322 CD Player

1 Answer

Bought a kenwood kdc 322 at a flee mart and installed in my car it powers up but says enter code is there a special number to enter


yes it should have come with the box, otherwise get serial no and contact manufacturer, they may require proof of purchase

May 24, 2010 | Kenwood KDC-322 CD Player

2 Answers

Kenwood KDC-322 code


بدي كود مسجلة كينوود kdc-322 code for kenwood

May 29, 2009 | Kenwood KDC-322 CD Player

1 Answer

Kenwood KDC-322


Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

May 27, 2009 | Kenwood KDC-322 CD Player

1 Answer

Kenwood KDC-322 volume cutting out


there buggers rewire the earth/ground

Jun 19, 2008 | Kenwood KDC-322 CD Player

1 Answer

Kenwood kdc-322


do you have the remote for it also? If you do you can unlock it by following this tip.

regards
robotek

Jun 11, 2008 | Kenwood KDC-322 CD Player

1 Answer

Kdc 322 unlock procedure without the remote


i need a code for kdc-322 i bay a used car but they dont giveme the code the unit is workin but askinme for the code please can some one helpme wit the code

Jun 10, 2008 | Kenwood Car Audio & Video

1 Answer

Kenwood KDC-322


If you have the remote control for the unit, or can buy one then you can reset the code. Just ask me how...

Jan 09, 2008 | Kenwood KDC-322 CD Player

Not finding what you are looking for?
Kenwood KDC-322 CD Player Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4979 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...