32" swiss tec model no sky-es30/wicg

Hello!
Try to reset your TV. Unplug it from the power strip, then plug it back in within a minute. It might help. Make sure, you Sky is on, before you plug TV back into power. Of course, connection between 2 units must be intact.
Modern TV sets will scan inputs at "start up" and will show you available signal sources. Be patient: it might take a few minutes for systems to recognize each others settings. Also: after you done with that, remove a battery from your TV remote. that will prevent your next mishap.
Good luck,
Alex.

Hello
Sky remote code for Wharfedale TV are:

065

584

699

OK.

Hello Heidi, you will need the brand and model number for your TV when you click in to sky.com. after you do you might have to sign in or register if you haven't done so. Then click on watching sky, then remote control help, this will take you to the find your code, this is where you'll need the model and make for your TV.

hello,


Well first you can try - 065, 244, 405, 318, 037, 398, 191, 459, 245, 389, 060, 275, 0206, 0584, 0742, 0851, 1165, 1176, 1208, 1219, 1280, 1293, 1665

if none of the code works for you then please follow the below link to know how to search your sky remote code -

sky.com/portal/site/skycom/skyhelpcentre

also check the below link -
skyuser.co.uk/tools/remotecodes/index.php

Good Luck!!

hello,
Well first you can try - 065, 244, 405, 318, 037, 398, 191, 459, 245, 389, 060, 275, 0206, 0584, 0742, 0851, 1165, 1176, 1208, 1219, 1280, 1293, 1665

if none of the code works for you then please follow the below link to know how to search your sky remote code -

sky.com/portal/site/skycom/skyhelpcentre/producthelp

also check the below link -
skyuser/tools/remotecodes/index.php

Good Luck!!

Hello Rubel

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0056

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

hello there i have a link here just follow instructions hope this helps thanx for using fixya and please rate if you think i helped you!
http://www.sky.com/portal/site/skycom/skyhelpcentre/producthelp?nodeId=73a6e9e0-0ade-4eed-810b-cec670799bcc&articleId=11320303

there is no picture on my 30inch swisstec sky-es30/wicg

Have you tried 0863?

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Samsung Code: 0060

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.