Question about Sony KLV-S26A10 26 in. HD-Ready LCD Television

1 Answer

Channels changing on its own, sound increasing on its own

I have been using SONY KLV-S26A10 for more than 2 years now.
Lately i have problems where channels change and volume increases even without us giving a command. The TV sometimes switches on its own. Waht would be the cause?

We receive channels thru a cable service provider.

Posted by on

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    2 possibilities,
    either control switch (preset / volume) on TV is defective
    or system control chip is defective.
    Qualified TV tech can identify and fix this problem.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers

Do you know where your remote is?I have had it where it would do that for days and then I would find my remote was wedged into my chair somewhere and when I sat down it would press a button.Either that or check the wires in the remote and TV.For the changing channels do you look at your remote when you press buttons to switch channels?There is a common button,which,when pressed,will surf through all of your tv's channels.

Posted on May 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hi sense TV the other day I was change the channel add. now all it does is power on to a blue screen thhgat day there is no devices to the tv


You have a defective T-CON board most likely, but that is just a guess without doing the required testing.

Jan 11, 2017 | Televison & Video

1 Answer

Directions for remote control for model#WD40fb2530 what are the buttons for?


You have to do a channel scan to store active channels in your area, then you can press channel up or down to step through them.

Jan 10, 2017 | Televison & Video

1 Answer

36 inch sony bravia tv I hve no sound plz help


Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electro-medical.blogspot.com/

Jan 09, 2017 | Sony Televison & Video

1 Answer

What is the problem of my sony bravia klv-32bx35a double image after sodering the t con bord the image was lost all black....hope you can helpe thankyou


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 09, 2017 | Sony Televison & Video

1 Answer

Truetech 10 inch under the counter tv is stuck on channel 2. I need 3. Channel buttons on tv & remote do not change 2 to channel 3. Unplugging, Resetting hasn't worked Any ideas?


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Jan 08, 2017 | Televison & Video

1 Answer

What recording disc do I use for bdhddcombo when recording o TV channels


It is better to use the slowest eg 4X disc possible but some channels may not record due to encryption
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | Televison & Video

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

My UR5U -9020L remote won't change channels or pull up the guide?


how long have have you had the remote and is this the first time this has happened and when was the last time you changed the batteries?

Nov 26, 2014 | Televison & Video

1 Answer

Troubleshooting tv


you need to buy tv converter box,

Jun 16, 2014 | Televison & Video

1 Answer

My panasonic DMR-EZ45V will not auto -setup restart the dvb freeview channels it goes through the channel numbers but they do not download only the anologue channels download. it is connected to a...


I have one of these with the same problem. I couldn't find any others with answers but there are people giving answers about the DMR-EX75 showing the same problem due to power supply decoupling capacitor failure.
I just ordered a manual for mine from manualzone.com to try to locate the culprits. - Wish me luck!

Jul 25, 2011 | Televison & Video

Not finding what you are looking for?
Sony KLV-S26A10 26 in. HD-Ready LCD Television Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

100304 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...