Question about Dishwashers

2 Answers

Dishwasher stopped working. Suspect electronics issue.

I recently purchased a kitchenAid KUDD01DPPA Double-drawer dishwasher. The bottom drawer suddenly stopped working. It does not respond to any commands on the touch keypad. four of the cycle select buttons (sensor wash, heavy duty, normal and light china) will all flash together every ten seconds, but otherwise, nothing. Also, the left end of the touch pad panel is extremely hot! it is not hot on the top drawer which is functioning normally.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. Paid $150 for the dishwasher on Craigslist a year ago... Hope the control panel isn't too expensive. I'd hate to pay more to fix it than I did the entire dishwasher!

Posted on Jul 26, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

An expert from another site says it's a faulty control panel and may need new actuators.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a two drawer KitchenAid KUDD01DPPA. Upon pushing the start button on either drawer the dishwashers will start. then within a minute they turn red and beep non stop and the dishwashers do not run


Usually this indicates a leak. Open the bottom drawer and look underneath and behind it in the base of the frame and see if there is water sitting in there. If so, dry it out with towels. Once all the water is dried out run the dishwasher again. If the same thing happens and the water returns you will have to find the source of the leak. Sometimes its just a temporary leak from a tall item obstructing the lids from closing and sealing all the way.

Feb 27, 2015 | KitchenAid 23 in. KUDD01DPPA Stainless...

1 Answer

Have a kitchenaid double drawer dishwasher. While running the bottom drawer the top drawer fills up with water. Had the filler valve on the garbage disposal changed. Issue still continues. Any suggestions


Mine does the same thing! (Same model) I've finally discovered that if I start the bottom drawer first and the top drawer just after that doesn't happen as much. Also, if I run the garbage disposal (and water obviously) while it's starting (I will try to do my hand washing while the dishwasher is getting going) that seems to keep this from happening as well. I've given up running just one drawer, which totally defeats the purpose of buying the 2 drawer dishwasher. But it does keep me from having to bail the bottom drawer :-( I'd like a better solution to this too!

Sep 10, 2013 | KitchenAid 23 in. KUDD01DPPA Stainless...

1 Answer

Kitchenaid dishwasher wont stay closed


you might need a new Latch, Drawer (left Hand) part number 8194053 okay

Feb 07, 2013 | KitchenAid 23 in. KUDD01DPPA Stainless...

3 Answers

Kitchenaid dishwasher KUDD01DPPA0 lower drawer has no lights on start/stop badge and that drawer will not run.


hello, this is the schematic for your entire machine in case you ever do need it http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDD01DPPA0/0593/0130000?pathTaken=&prst=0&shdMod=KUDD01DPPA0 in your manual it would say what the start stop badge means If this unit is new do not attempt to repair the unit as it would be warrantied and you would void your warranty and I think it is still warrantied seeing how there is no manual online available yet if your unit is not warrantied and you require further diagnosis please message me back and I will look further into your situation Thanks Rick
p.s the stop badge could mean you have a blockage in your drain area but need clarification on your warranty information first Thanks again Rick

May 19, 2011 | KitchenAid 23 in. KUDD01DPPA Stainless...

1 Answer

Model#KUDD01DPPA Both Drawers keep reverting to light/china error code


Hi. I have the same problem. Were you able to find a solution? This error code means "motor failure". But how can both motors fail at the same time?

May 14, 2011 | KitchenAid 23 in. KUDD01DPPA Stainless...

1 Answer

Both drawers are stuck in the on position, both


The water sensor is malfunctioning. It believes that there is still water, so the pumps run and the washer will not continue on its cycle. replace the water sensor, or dry it out so it functions properly

May 15, 2010 | KitchenAid 23 in. KUDD01DPPA Stainless...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

13732 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...