Question about Kenmore 22422 Top Load Washer

1 Answer

Kenmore heavy duty washer wont spin but does everything else corr

Like i said it runs through all the wash gitate and rinse cycles but will not do anything on the rinse & spin. the belt is still on everything and everything underneath still is moving the way it did when the washer worked completely functional....ny suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

You really still have a belt model? that unit is close to 30 years old now.
anyway if the unit looks like all is moving, then you may have a bad lid switch or most likely an open coil on the wig wag assembly.
it is the part the has 2 coils on a metal bracket on top of the transmission. it moves back and forth when the unit is running.
does it drain but just not spin? if so then you could just have a broken wire to the wig wag or the coil could be bad. wires do break to the wig wag , but you usually hear the coils engaging then shutting off if the wires are bad. so check the coils and try to replace the wig wag second if you dont find a bad wire.

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore washer - water won't drain. It stops


If the water drains between the wash and rinse cycles, your motor and pump are probably OK. If this is a machine with a dial, try a different cycle, like normal instead of heavy duty. If that works and the machine completes the entire cycle then the timer probably has a bad spot. You might try to find a replacement timer if that is the case although I didn't have any luck with my 10 year old washing machine. Best of luck

Mar 20, 2010 | Washing Machines

1 Answer

Washer doesn't rinse well. Doesn't spin water out properly.


Ok.you need tro make sure that its pumping out okay...if not check the filter..then pump..

Feb 21, 2010 | Washing Machines

1 Answer

Washer does not rinse & spindry after getting submerged in water.


everything needs to be checked from the timer control button to the motor, im guessing it agitated through the wash cycle but wont spin now right? your flood could have damaged any number of items... run through ( with the machine unpluged ) and test the components for continuity and/or resistance.

Oct 26, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will not go to the rinse cycel.


check cold water line...onthejob,,,im assuming no rinse cycle only..onthejob,,,no mater the cycle

Jan 31, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

While the washer drains and spins, new water comes in


Drain hose must be at least 30 inchs above the floor.

Jan 06, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Washer does not spin and drain water. (Kenmore Elite Heavy Duty)


it seems to me ur washer transmission is going out or already there

Nov 26, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore heavy duty series washer


you need a new timer. order part thru sears.

Mar 19, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

I also need the answer...


where is the lint trap located

Dec 06, 2007 | Washing Machines

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...