Question about Akai LCT3201AD 32 in. LCD Television

5 Answers

Scott lcd tv does not turn on

Model #lct32sha was working and was turned off to never turn on again with or without remote, possible cause?

Posted by on

  • 3 more comments 
  • cncvipros Jan 31, 2009

    I HAVE TAKEN THE SET APART TO INSPECT POWER SUPPLY CAPASITORS NEXT TO HEATSINKS ARE BULGED AND LEAKING ON TOP I ASSUME THATS WHY I DONT KNOW IF I BUY THEM LOCAL AND INSTALL IF THAT WILL DO IT. I WOULD APPRECIATE THE SITE NAME FOR PARTS THANKS

  • lcops Feb 05, 2009

    I have a HDT ILO that uses the same power supply and does the same thing. Where can i get a power supply or parts for MLT169A.



    Thanks

  • Joe LaVancha Feb 09, 2009

    I have the same LCD and just started doing the same thing about 1 month ago. I went to Radio Shack where I bought it from and they don't even sell them anymore and don't have any contact information for the manufacturer. I continually have to unplug the set and plug it back in.. It seems to "reset" itself and will turn back on when I hit the power. But it will keep shutting off. There seems to be no set time either. It could stay on for 10 secs or for hours. From what I can gather from reviews, this seems to be an issue with this and the 37" models. I just bought another brand lcd and will be tearing this one apart to see what is up.

  • sallmd Mar 25, 2009

    I turned off my tv scott 37'', for few days i had to plug out and plug in again, now it does't work at all

  • Joe LaVancha May 11, 2010

    I am interested in the website that dgjtex mentions about. I would like to try to change the power supply in my scott lcd. Any information will be appreciated.

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

We just repaired ours - same problems (did not replacc the 1000uF and 470uF Capacitors in secondary yet as ours were still OK, but the FET was killed by an arcing capacitor across a diode,
See the page we created for this with pictures.

Be careful - High voltage!

http://www.findonefindall.com/toyota-sienna/LCT37SHA_Scott_Akai_LG_LCD_tv.htm

Posted on Aug 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Hey, I believe it is your power supply, typical problem on these sets, I have a website that I can refer you to, to purchase a new one at wholesale, but will have to get it for you.

Posted on Jan 31, 2009

  • David Johnson
    David Johnson Jan 31, 2009

    Allied Electronics if you want to replace components, check out shopjimmy.com.

    for complete board I hope I have helped you, and thanks for the vote

  • David Johnson
    David Johnson Jan 31, 2009

    Thank you for the vote of confidence

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Shopjimmy.com for replacement power supply MLT169A for many Akai/Ilo/Scott flat panel displays. About $100.

Posted on Sep 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Program channels on a 37" scott lcd/tv # lct32sha

Posted on Mar 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 558 Answers

Allelectronics.com

Posted on Apr 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony tv when i turn tv on only shows vertical lines then they slowly fade away and goes black


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 14, 2017 | Sony Televison & Video

1 Answer

E500i-B1 won't come on.


Suspect a failing power supply

Jan 13, 2017 | Televison & Video

1 Answer

What to do when your Toshiba 55TL515U powers on, works fine for a few hours, then suddenly turns off, and then continues to click as if it is turning on and off again?


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 11, 2017 | Toshiba 55TL515U 3D LCD TV

1 Answer

SONY flat screen will turn on green light showing but no picture. TV turns off in 5 seconds. Advice???


Sounds like display panel fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 09, 2017 | Sony Televison & Video

2 Answers

How do i fix black spots on my LG plasma tv. model 50pj350ub


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | LG 50PJ350 50 HDTVReady Plasma TV

2 Answers

Sound is pinned at 100% output. Remote nor physical buttons on device are working.


If any of the buttons on the remote or tv work, then try going into the menu and turning the sound down manually.

Jan 08, 2017 | Televison & Video

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

How can i turn on my tv without a remote?


It would be helpful if you told us WHAT KIND OF TELEVISION you're trying to turn on. Perhaps there is a POWER BUTTON on the front of whatever television you have?

May 24, 2014 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Akai LCT3201AD 32 in. LCD Television Logo

3,732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2294 Answers

The Knight
The Knight

Level 3 Expert

71672 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...