Question about Air & Gas Compressors

1 Answer

A Tip perhaps

I found this site that is typically used for sharing of music, photos, etc. It's called They give you a free account with 4 gig of storage and of course you can upgrade if you like to get more storage.

Here's how we can use it......

We get lots of requests for instruction manuals, owner's manuals, parts lists, etc. Well, sometimes, you can drill down a mfg. site and get a .pdf file and what I usually do is open it, copy the link and send it to the customer that needs the documentation.

However, sometimes, the mfg. does a **** job of building there site and other than download the file, which puts it on your computer, and leaves you with trying to figure out how to get it to the customer. fixes that. You can now download the file from the mfg. website then upload it to After the upload, you copy the link, which makes the file available to our customer by simply clicking the link that you paste in to the solution box.

They can access it whether you are logged in or not.

What do you think?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Your idea although worthy is borderline and may attract the wrong form of criticism of self serving. People would guess and undelying motive you may have of driving people to your website and not the manufacturers.

It is also very highly expected that no one ever give our anyone else's email address or real name, even as a joke. This rule is sensible given that we never know who is who and what their motives are or theri personality may be.

I would not encourage you to do anything other than point people to the file a the manufacturer's site and only that for good or bad.

You wold be advised to run this by our Community Manager Lauren Change lauren@fixya first and get her read on your idea as well. It is a good idea, I'm not so sure its advisable though.


Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need an operating manual for an atlas copco ZT145 compressor with the elektronikon grapgic plus control panel. I need to change the setpoints.

One of the regional Atlas Copco websites should be able to help or perhaps the mother site.
Just use google.

Feb 17, 2015 | Air & Gas Compressors

1 Answer

Where to get gasget and parts for Campbell Hausfeld VT632900AJ

A good site I've found for breakdowns of compressors is You can also buy parts there or use the part numbers to search the web for prices. When searching for your model number use VT632900, leave the AJ off.

Mar 20, 2012 | Air & Gas Compressors

1 Answer

Looking for parts list. missing strart capasitors etc.a manual or schedule can help me out.need to buy some parts ingersoll rand dd2t2

Hi johnny camer.
Sorry I could not find a parts list for your compressor model
But I found the ingersoll rand contact number, you can call them and talk to them on the net and get the right parts and manual you need.
Please take time to rate me

Aug 31, 2011 | Ingersoll Rand DD2T2 T Win Stack Single...

1 Answer

Can,t find replacement parts for this lemon thanks - CachedColeman Powermate Air Compressor Parts, Breakdowns & Manuals. Choose Your Model # Below to find Breakdowns & Repl.

I just browsed the net and found several sites that sell coleman parts. Above is just one I copied and pasted. If your unit is older, if you know the type of pump you can search for that. eg. (debilvius) A lot of compressors have the same pump under a different name like Coleman, Sanborn etc. I have found some units that are just so old they are obsolete and parts just aren't available.Hope this helps. Good luck!

Aug 16, 2011 | Coleman Air & Gas Compressors

1 Answer

Our Brad nailer model SB-1842BN is well oiled but it will shoot the brads just a little into wood or not at all. Help!!

Can u adjust the drive depth on the tip of the gun? My nailers all have a knob to adjust the drive depth. Also, what pressure are you using? I typically shoot mine between 90 and 120 psi. Hope this helps.

Jul 17, 2011 | Stanley Air & Gas Compressors

1 Answer

Manual for chicago pneumatic air compressor

go right to their web site and you can download free in pdf form any manual from user manuals,parts list,etc.

Feb 26, 2011 | Chicago Pneumatic 7.5 Hp 3 Phase Air...

21 Answers

Bostitch 6 gal compressor regulator knob is broken

Regulator knob can be purchased from amazon, take a look: Amazon com Bostitch compressor regulator.
Wish you best of luck.

Jul 10, 2010 | Stanley NEW Bostitch 2 HP 6 Gallon...

1 Answer

G22 airbrush is blowing air out of the cap and non is comming out of the tip wtf? checked everything, their is air comming out of the nozzil but no paint.. the cap keeps blowing off and the pain getting...

It sounds like you have a dirty tip. It doesn't take much to stop the flow to the tip. You need to take the tip completely apart to give it a proper cleaning. Just soaking it won't do.
Hope this helps but if not let me know and I'll try and trouble shoot further.

Jun 08, 2010 | Master Heaters MASTER AIRBRUSH MODEL G22...

2 Answers

Need Manual for Husky Model 41214 Air Compressor

You can get the manual for model 41214 from my dropbox area:

BTW, if you find this manual helpful consider installing dropbox using this link (full disclosure -- I do get about 0.2 GB freespace from dropbox if you install using this link):


Dec 20, 2009 | Air & Gas Compressors

Not finding what you are looking for?
Air & Gas Compressors Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air & Gas Compressors Experts

John Trevino

Level 3 Expert

1378 Answers


Level 3 Expert

2386 Answers


Level 3 Expert

60960 Answers

Are you an Air and Gas Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides