Program bell sat remote for insigna tv

I have tv insigna and remot control rc-16 who code is correct by fuction

clean the contacts battery +open the remote for keypads from dust+corrosion. and reset code.

God bless you

0038,0029,0081,0092,0022,0029 are the codes to check. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Ask the technician of the manufacturer for the service mode or the program for setting your lcd to its factory deault setting. then set your tv using a remote control. Not all technicians are willing to give that information. Try to download manual of your lcd from this link and check it yourself :http://www.retrevo.com/support/Insignia-IS-LCDTV32-TVs-manual/id/8223ag521/t/2/

You need to program the remote with the correct Insigna code. The codes I have for Insigna LCD.s are...

0103, 0189, 0217, 0135, 0133, 0116, 0167

0456, 0029

GO TO REMOTE CENTRAL .COM

need remote code for insigna tv

Try 189 or 244 or 309..........Hope that was helpful Thanks for using Fixya.com.............enjoy your evening!

If you have tried locating your tv type in the back of the manual that came with the receiver and can not locate it then chances are that the remote does not ssupport your TV. You can try finding the code by doing a power scan as follows to see if one not associated with your tv will work: With the TV on press and hold the TV button on the top left of the remote until all buttons light up across the top. Now preess the small red tv button-the topTV button on the left of the remote should stay lit. Now press the channel up button slowly until the tv shuts off. If it does press the channel down button and then the channel up button. The tv should now turn on. If it has press the pound sign and release. The tv button will flash three times. Now try powering the tv on and off. You should be sucessful. Remember to put the remote back into SATmode. Thanks for using Fix Ya. Let me know if you need further assistance.

Try www.remotecodelist.com ....T.