Question about TV Receivers & DVRs

1 Answer

I cannot recieve the digital television on channel 3 like the owner's manual says.I don't know the problem and it is brand new.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Teh dtvs have a switch in the back which has the ability to be on ch3 or ch-4. please make sure the switch is on ch-3.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I get an owner's manual for a RCA ATSC11 digital tuner?


On the RCA ATSC11 you can see the menu if you switch to 480i resolution and connect a video cable to the monitor output. Otherwise the menu is visible only on the digital output.

Dec 23, 2011 | RCA ATSC11 DTV Receiver

1 Answer

My father in law has one of these digital recievers and on channel scans it says no channals! im unfamiliar with these recievers and i was wondering if u need to register or need a special antenna or what...


Hello,

where was the receiver bought from? The receiver needs to be registered before it can get channels. Also you need the help of an expert that will help you scan the channels using the right/correct frequency.

The receiver needs to be connected to a dish, subscribed (registered), and it should get channels.

Good luck.

Nov 24, 2010 | TV Receivers & DVRs

1 Answer

I had all 5 terrestrial channels on channels 1 to 5 on my television and Virgin channels on channel 6. I was sitting watching the television when all 5 channels stopped working and I am left with the...


I don,t where you live & therefore I don't know which transmitter you will be picking but this sounds as if your local transmitter has now stopped transmitting the analogue signal. You maybe aware from a lot of advertising that this form of signal will be getting turned off in different areas around the country so unless you have cable or a digi-box or a digital TV then you will not receive any signal. As you have the Virgin box you will still receive channels 1 to 5 on digital but not on analogue.

Oct 15, 2009 | TV Receivers & DVRs

1 Answer

I have had an outdoor antenna for several years to recieve HD local. Before the conversion I purchased a Samsun HD Tuner. It was working fine will all channels working and guide providing all program...


8 11 & 14 are std definition. All digital channels are 1.1, 1.2, 1.3, etc. You may need to re-align your antenna. Digital is Very Very direct, analog was very scattered. Hope this helps

Jul 08, 2009 | Samsung DTB-H260F

1 Answer

I changed out a tv and dont know how to program without a recieve


If you have a 311 receiver or any single/solo receiver than you will need to put the new set on channel 3. If you a have a duo receiver try 60air or 73cable. Thanks for using Fix Ya.

May 02, 2009 | DISH Network 311 DTV Receiver

1 Answer

I need an owners manual for the receiver


What channels on what satellite? You should always start with sat G1 channel 3 and rehit. This will map in all the channels the receiver is authorized to get from Motorola.Options 6 5 and the trip counter should go up by 5 and show ~ 4600 channels
After that you need to make sure you are good on the arc. Start with G-1 5 (analog) then go east about 20 counts to C3 channel 7 On both G1-5 and C3-7 you may need to adjust the skew to get the picture.
The same is true for digital channels like those on G3C like TNT, CNN, SPIKE etc.
Once you know you are on the satellite then adjust the skew.

Feb 22, 2009 | Arris DSR922

5 Answers

Up grading Fortec Star (Lifetime II) reciever.


my fortec star reciever is not up grading through (Action HBS link box) to open Showtime program

Apr 25, 2008 | Fortec Star Lifetime ULTRA

1 Answer

Philips DTR220/05 digital freeview reciever not recieving anymore


If the box is still receiving some channels, then the box is probably not at fault.

If you have done the full "First time Installation" rather than search for new channels, then eithe the aerial, connection or signal is likely to be to blame.

There have been several changes with the Freeview service over the last few months, and there will be more in the run up to analogue switch off.

In some cases, channels have moved, and in other cases the service has been switched off for a short period, low power etc.

Check the aerial on a standard analogue signal, if the quality is poor, then this rules out the box.

Feb 23, 2008 | TV Receivers & DVRs

1 Answer

Philips plasma tv model #42pw996217


Kevin I don"t know if you still have this problem? but if so I have a box and a remote. make a good offer and its yours.

R.Carter
469-337-4962

mrrcc2@yahoo.com

Feb 19, 2008 | Philips FTR-9964 Tuner/Receiver for Plasma

Not finding what you are looking for?
TV Receivers & DVRs Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top TV Receivers & DVRs Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...