- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have a faulty SYSCON MICROCONTROLLER.+faulty associates circuits, like CLKS, RESET. you must go to the repair shop TV for fix it. However you can try as the last thing before to go the repair shopt, Clean tHE VHS+DVD, with tape cleaner+disc cleaner too.and Proof God bless you.
I had this problem when copying an old family vhs tape. I had to unscrew
the top of the magnavox to access the vhs tape. Then, I gently removed
the tape and replaced the cover. After winding the tape back, I put it
in the player and immediately pushed fast forward for about 3 seconds
before hitting play followed by d.dubbing. I was able to make a copy of
the tape and did not damage my original.
if VHS tape is in you have only one solution..to disassemble DVD/VCR ..Can you do it ? you may try !!t
Here's how to do it.. * 1 Turn off the COMBO. and unplug it. * 2 Remove the
4x screws off COMBO on the sides and take off the DVD/VCR casing. * 3 Look for the Tape which messed up with VCR transport mechanism ,try to release tape of the transport with your hand..
* 4 Since EJECT feature works with power only ,while you keep the
tape off from transport plug the device to power and turn it on..Don't
worry,you will see the eject mechanism starts moving back on forth,keep
the tape off it and let it eject..
* 5.When tape is out .If it
destroyed badly normally you should not use it however if the recording
in is valuable for you you can cut the chewed portion and splice it back together .(Pls see the video included...How to fix a broken VHS tape.) * 6 While it is open,place another Tape to see if mechanism works properly. and eject it... * 7 Replace the casing and the screws. Plug the player in and turn it on. Now player is finally working .. Hope this helps!.. Take care and please Remember to rate/vote and give us 4 Thumbs Up to continue for Helping out the Community :) http://www.youtube.com/watch?v=Q1PJWA2KGyg
Put tape in. Make sure the plastic tap isn't broke on front of vhs tape, if so, put tape over it. Put tape and vhs in player, turn vcr channel to 04 I believe. Then hit the copy button. Otherwise put on dvd/ hit copy button
I had this happen once and all I did to correct it was to fast forward it just slightly or manually wind it past the leader strip (the clear or white part at the beginning). To do it manually, there is a small hole you must insert a toothpick (or something else as small) to push the pin in and then advance it with your finger while holding the pin in. Hope this helps.
VCR is set with blank tape..Bring up vcr control on TV with television set on Chanel #3, go to menu
Follows procedure for progamming date,time start,time finish,chanel and.speed and single recording.finally click on menu and turn vcr off. Vcr lights indicate set for taping,,.Does no start to tape at requested time and lights indication taping ready stays on ??????