Question about Konica Minolta Office Equipment & Supplies
I have a Konica Minolta Magicolor 7450. When I print, particulalry on 32 lb glossy paper, the paper comes out curled and wavy. I am wondering if the fuser unit os too hot or old.
I had the same problem one time, they told me to pull out all of the toner cartriges, power off, power on, power off, replace all cartridges and the problem went away.
Who knows why. If this doesn't work....
Call Konica Minolta tech support.
They were pretty helpful to me.
Posted on Jan 06, 2008
SOURCE: Konica Minolta magicolor 2430DL
Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.
This will normally clear up any white lines in your print.
Posted on Jul 19, 2008
Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.
Posted on Nov 18, 2008
The fuser temperature is too high. There is probably some residue from the transparency left on the thermister or the thermister went faulty that causes a wrong reading. The only solution would be to have the printer serviced.
Posted on Aug 05, 2009
Tips for a great answer:
Aug 11, 2014 | Konica Minolta magicolor 7450 Laser...
Feb 17, 2014 | Konica Minolta magicolor 1690MF All-In-One...
Feb 02, 2014 | Konica Minolta magicolor 7450 Laser...
Apr 15, 2013 | Konica Minolta magicolor 7450 Laser...
Aug 23, 2010 | Konica Minolta magicolor 7450 Laser...
May 18, 2010 | Konica Minolta Magicolor 2530 DL Laser...
Jun 06, 2009 | Konica Minolta magicolor 2500W Laser...
May 27, 2009 | Konica Minolta magicolor 7450 Laser...
Feb 12, 2009 | OKI C3400n Laser Printer
91 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 2 Expert
Level 2 Expert