Question about Televison & Video

1 Answer

Verge products...peice of ****.

Does anyone know how to directly get in contact with these people? I am missing peices to my new entertainment stand and I cannot get ahold of them. Thank you so much if you can help.

Posted by on

  • pamelajm88 Feb 25, 2009

    We bought a TV Stand from Circuit City at their liquidation sale and when we got home a piece of it was split in half. Of course with Circuit city going out of business we can't return it so we tried to get a hold of the manufacturer, Verge. Which if you call their number listed on their website it says it is Circuit City. We tried leaving voice mails, emails, everything but of course no response either. Now we are stuck with a broke TV stand that cost over 100.00. If anyone knows how to get a hold of this place and speak to a live person let us know.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had an issue with a TV stand I purchased from Circuit City. Apparently this company was a subsidiary of CC and will not be able to help. If you read through the manuals they never imply having a warranty.

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge stratus trunk


check hinges for bends or missing peices. or a rubber peice might be missing. or something might hinder the latch from latching.

Aug 01, 2013 | Cars & Trucks

2 Answers

Air hose came off my 788 scroll saw how do i put it back on


The air nozzle/hose for your saw is a series of peices, about 15 or so, each a cone on one end and a ball on the other. They snap together like Legos to make the nozzle flexible and long enough to reach the cutting table. The first peice is made to adapt to the air pump and the last tapers down to a small opening to help increase the air pressure and direct it towards the cutting area. If you're missing either the first or last peice, a new air nozzle is available from Dewalt and several after market parts sites, the part number is 286311-00.

May 29, 2012 | Dewalt & Variable Scroll Saw

1 Answer

The backspace has come off on my desktop toshiba 3000-242 and the white peice has been detacted from the buton they are 2 white peices a long white peice and small peice with a thin part at the bottom the...


It is hardly worth worrying about at new keyboards are for sale at extremely cheap prices.
There are replacement keys available on ebay as a kit. Have a look.

Jan 23, 2011 | Computers & Internet

1 Answer

I HAVE A BUSHNELL 565 TELESCOPE AND AM MISSING A PEICE...IS THERE A DIAGRAM I COULD LOOK AT TO FIND WHAT PEICE IS MISSING SO I COULD NAME IT


Here are the Bushnell manuals:
http://www.opticsplanet.net/bushnell-warranty.html

Look down the page for your telescope.

Aug 10, 2009 | Bushnell Optics

1 Answer

Antenna/Cable Connector partially ripped... Hi, everybody. Does anyone know how to fix a ripped antenna/cable connection? Thanks for the help. My TV Model is a Daewoo DTQ-13P3FC 13" TV for more details....


The cheapest way i can think of is open the tv and solder the ripped peice back on. That should work. If not you can go to radio shack and buy a new peice for it and install it by soldering the connections back on. Hope I could help.

Wayne

Jun 26, 2009 | Daewoo DTQ-13P3FC 13" TV

1 Answer

Printer says there is a paper jam but there isn't


: Clear the jam from paper tray 1
  1. Remove all paper from the output tray.
  2. Turn off the product.
  3. Unplug the power cord from the back of the product.
  4. Lift the output tray and then check for jammed paper in input tray 1. Use these steps to remove any jammed paper.
    1. Raise the output tray. Figure 3: Raise the output tray c01321359.gif
    2. Grasp the jammed paper and pull it out of the product, toward you.
    3. Lower the output tray.
  5. Plug the power cord back into the product.
  6. Try printing a document.
    1. Remove all paper from the output tray.
    2. Turn off the product.
    3. Unplug the power cord from the back of the product.
    4. Lift the product off tray 2.
    5. Remove the jammed paper from the bottom of the product or from tray 2.
    6. Reposition the product on top of tray 2.
    7. Plug the power cord back into the product.
    8. Try printing a document.
    • If the issue is resolved, do not continue troubleshooting.
    • If the issue continues, proceed to the next step.
If you would prefer to view a video with audio instructions, click here (in English).
  1. Turn off the product.
  2. Unplug the power cord from the back of the product.
  3. Remove the ADF input tray and open the ADF cover. Figure 4: Open the ADF cover c01285903.jpg
  4. Remove the jam cleanout part. With both hands, lift up on the two handles until the part unsnaps. Rotate and lift the cleanout part and then set it aside. Figure 5: Remove the jam cleanout part c01285904.jpg
  5. Lift the green lever attached to the pick mechanism and then rotate it back until it stays open. Figure 6: Lift the green lever c01285905.jpg
  6. Check the ADF paper path for jammed paper. Figure 7: Paper jammed in ADF paper path c01461018.gif
  7. Check for jammed paper where paper enters the ADF paper cleanout. Figure 8: Paper jammed as it enters the ADF paper cleanout c01461019.gif
  8. Gently remove the paper without tearing it. Figure 9: Remove the jammed paper
    • If the paper does not come out with gentle pulling, follow these instructions.
      1. Open the ADF, and then use both hands to gently loosen the paper.
      2. When the paper is free, gently pull it out.
      3. Close the ADF.
  9. Lower the green lever.
  10. Reinstall the jam cleanout part. Push down on the two tabs until the part snaps into place.
  11. Replace the ADF input tray.
    • Figure 11: Follow the correct method to attach the ADF frame c01461020.gifc01461021.gif
    • Make sure that the ADF cleanout part attachment is secure. If it is loose, push down on the two tabs until the part snaps into place.

Jun 22, 2009 | HP Officejet Pro L7680 All-In-One Printer

2 Answers

Upper spray arm detached


The upper arm clips onto the upper drawer not onto the nozzles!

Jun 21, 2009 | Siemens SE24A230 ExtraKlasse Built-In...

1 Answer

Evenflo Infant Car Seat Canopy Fastener


There Should be a 1 800 number on the Box That you can call
and they should send the peice your missing
if not try going in to a store Where they sell simlaler Products
and see if they carry the peice your missing
I hope I have been of use

Aug 26, 2008 | Evenflo Embrace

1 Answer

Belts


adjustment arm

Jun 19, 2008 | 1999 Mitsubishi Eclipse

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73427 Answers

Cindy Wells

Level 3 Expert

5016 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...