Question about Projection Televisions

1 Answer

Coloring is off and there is a ghosting effect

Hello, I posted this issue about my Samsung 42" rear projection HDTV (Samsung HCN4226W.). Your solution sounds good but I have one question, the part number you listed was:

BP95-00142E convergence amp

When I do a search on that, the part number comes up as a convergance board. There is an amp with part number:

BP94-00155A Amp

It is the amp I need, not the board, correct? Thank you for your help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

Hello,

Part # BP95-00142E is the correct convergence amp board for a model # HCN4226W. Part # BP94-00155A is listed as a "CG Amp assembly board" also, but is not correct for a model # HCN4226W. They are both basically convergence amp boards. Here's a link to order the original Samsung covergence amp board for this model (HCN4226W) from a major parts distributor:

Samsung HCN4226W Replacement Part Convergence Amp Board

Posted on Mar 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv sumsung hcn4226w 42 inch rear projection will not turn on


either the lamp is burned out or the ballast and power supply board need to be replaced. can call 1-800-samsung for nearest service center.

Dec 11, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung DLP TV- colors seem to mess up -Faces have green streaks


sounds like you are haveing an issue with th color wheel timing. either the color wheel is bad or the dmd board is bad.only way to know is to have a technician look at it.

Oct 22, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung HCN4226W "image pinching"


The convergence IC has gone out and is located on the Main bd or the Power supply bd depending on the specific model and must be replaced and a Full convergence alignment must be performed to return your tv to a watchable condition. Only a Samsung trained tech can do this.

Jul 16, 2009 | Samsung HCN4226W 42" Rear Projection...

2 Answers

Samsung HCN4226WX has green and red ghosts very bad


Probably bad IC's (color or convergence amplifiers). Soldering and knowhow required.

Apr 26, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Coloring is off and there is a ghosting effect


You have a convergence problem.You can replace this module cheaper than it can be repaired.It is so easy to do and electronics skill level is not required.If you can unplug the TV and remove the rear cover,then you can do this repair yourself.1 screw and 5 connections(plug in) is all it takes.The part number you need to order is BP95-00142E convergence amp. I would google search it and find it at the lowest cost to you.Good luck and please rate my information.

Jan 30, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung HCN4226W 42 in. Rear Projection


My 5 year old Samsung HCN4226W is not coming on (no picture and no sound). When pressing the "ON" button, I can hear a "click" like it wants to come on, but nothing happens. HEL

Oct 10, 2008 | Samsung HCN4226W 42" Rear Projection...

1 Answer

No power


you can get a replacement deflection board at the following link. If you dont know which one your model requires leave them a email with your model number and what youre needing they respond quickly and will provide the proper one for your model.
http://servicemanuals.vstore.ca/

Aug 27, 2008 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Blue ghost


Replace convergence IC'S and check values of convergence circuit resistors.

Aug 07, 2008 | Samsung HCN4226W 42" Rear Projection...

1 Answer

42"Samsung HCN4226WX/XAC


· Samsung parts for convergance problem
· http://www.partstore.com/Part/Samsung/Samsung/BP9500142E/New.aspx

Oct 09, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

RED Ghost Image on Samsung 42" Rear projection HDTV (Model - HCN4226W)


I WOULD RATHER THINK IT IS ONE OF THE CINVERGENCE AMPLIFIER & DRIVER IC,S A REAR PROJECTION TV NORMALY HAS 2 OF THEM AND THEY ARE THE SAME AND NORMALLY THE NUMBER ON THE IC STARTS WITH "STR *****" SWAPING THE TWO AROUND WOULD PROVE THAT YOU GOT A PROBLEM ON ONE OF THEM,THEN JUST GET 2 NEW IC'C THE SYMPTOM THAT YOU ARE DESCRYBING IS MOST LIKELY THE IC'S HOPE THIS HELPS IGNATIUS ,SOUTH AFRICA TV REPAIR ENGINEER

Feb 20, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...