Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

The cycle signal beeps constantly when you turn the power on

The unit will wash put you have to keep hitting the start button till it wants to go,even then the beep goes on and on??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

You have a machine/motor control board (also called an ECU) that is on its way out. it will finally fail with the dreaded F1 flashing code, so you're on borrowed time.

you can either call sears one source and complain about this, or do it yourself by buying the part and doing the work. if you call sears one source, they will assign a case number and offer to cover (on average) $150 in labor and $100 in parts (but you have to pay for it up front, then call them back once everything is complete for the refund). have them come out and diagnose it since this a common problem on this crappy expensive washer (i have one and i have never hated something so much in my life as i do this washer).

if you do it yourself, the control board listed on searspartsonline is the latest & greatest that is suppose to solve this issue. i have the new ECU and it solved the F1 issue, but i have other problems that have cropped up (error codes HC & LF). its always something with this POS.

i had rumors about a recall and the paperwork being stuck in the legal department, but nothing new since Nov 2008.

good luck with sears or doing the work yourself.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge adora washing machine beeps when pushing start with door closed


Hit the power button until there is NO display . Unplug and wait a minimum of 30 seconds , plug back in and within 30 seconds hit SIGNAL button then DELAY START button then SIGNAL button again then DELAY START button again. door should lock and display t01 It is now in test mode . There are 14 different test it can run through in this mode , but all we are trying to do is check for error codes now and maybe get you back to normal, So turn the knob one click clockwise and hit the START/PAUSE button and see if any error codes come up. To exit the diagnostic mode - hit signal button then delay start button then signal button then delay start button and you are out of service test mode and back to normal. Post any error codes.

Dec 07, 2012 | GE WSXH208A Front Load Washer

1 Answer

Beeping sound when cycle is finished just started after 8 years. how do I turn it off?


Hello,

Welcome to FixYa.

I think can answer your question..."beeping sound when cycle is finished just started after 8 years. how do I turn it off?"


Follow these steps...

**How to Operate the Cycle Completion Signal**


1. Open door, hold down program button (see
Beeper Table below) and simultaneously turn the unit "ON".


MODEL Program BUTTON

SHU 9950 Delay Start Hours
**SHU 9910-9920 Delicate/Econo** should be yours
SHU 8800/8810 Quick Wash

SHV 6800 Delay Start Hours
SHV 4800 Delicate/Econo
SHV 4300 Delicate/Econo


2. Release program button.
a. For SHV 6803 and SHU9950 models:
The display will blink with a code of "0", "1" or
"2". You are in program mode.

? If the display blinks with a "0", you will hear
no signal (indicates OFF).

? If the display blinks with a "1", you will hear a
LOW volume signal.

? If the display blinks with a "2", you will hear a
HIGHER volume signal.

b. For all other models with the beeper
function:

? If the machine beeps, then the Cycle
Completion Signal has been enabled.

? When you push the button again and it does
not beep, it means that the Cycle Completion
Signal has been disabled.

3. To change the program, press the program
button until the desired setting is selected.

4. Turn the Dishwasher off to take it out of
program mode.

* At the end of a wash cycle, the beeper will sound
off two times, and again every 15 minutes until the
dishwasher is turned off.

Hope this answers your question and provides you with what you needed.

Thank you for choosing FixYa and good luck.

Please take a moment to rate the solution provided and a short testimony if you feel it's warranted, but also let me know if you require further assistance.

Regards,

Macmarkus :)

Nov 06, 2010 | Bosch SHU9915UC Dishwasher

1 Answer

Hi my washing machine door wont open, feels like the lock has broke ??


hi have you tried turning machine off at plug for a min then power back on put on a cycle press start. wait till it starts to fill and press stop and hold down the reset button till it beeps and wait till door unlocks. Or a quick way to open the door is unclip the foot kick stopper at bottom front of machine and pull the emergency door open which is a thing peace of hanging plastic. if none of this works try starting a cycle then press stop soon as it starts to fill and turn off on machine not at plug. hope this helps.

Sep 20, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Fisher & Paykel washing machine model- smart drive 603 how do we programe the favourite cycle button? thanks


prss and hold the fav button till u hear 2 beeps , set whatever u want it to be and then prss and hold the button till u hear 1 beep turn power off , set

Oct 27, 2009 | Fisher Washing Machines

1 Answer

END OF CYCLE KEEPS BEEPING WHILE WASHING


Maybe the machine is telling you that your load is uneven, When going through a spin cycle it will detect if the load is too heavy on one side. Just open the door and spread the load evenly. good luck.

Jan 26, 2009 | Whirlpool LHW0050PQ Front Load Washer

2 Answers

Lid lock stays on and constant beep on excellence washing machine


i have the problem when i turn power on 2 green wash cycle lights plus the red lid lock stay on with constant beeping every second then when i push the start button the 2 green lights go out and the red lid lock light stays on but no beeps please help

May 26, 2008 | Fisher and Paykel IWL12 Top Load Washer

5 Answers

Dishlex global 300


try holding the start and program buttons simultaneously for a few seconds, it seemed to reset itself for me-i have done this a few times now.

Feb 04, 2008 | Dishwashers

2 Answers

Washing Machine stopped through cycle and now will not turn on


I can help with this. I work on the units they make. If you can email me @ curator@artinallforms.com I will guide you through

Jun 16, 2007 | Fisher Paykel EcoSmart GWL15

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...