Question about Microsoft MN-700 Wireless Router

3 Answers

Forgot password to acess< and or its still default setting. could you tell me what the wireless 700 routers default password is

Posted by on

  • sureshkumara Mar 07, 2009

    what is the securitycode of samsung sghi 450

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 64 Answers

Restore Factory Default Settings When you restore factory default settings to the base station, you clear your Internet connection settings and any special base station configurations that you have established. After the restore is complete, you will need to reconfigure your base station settings or restore these settings from a backup file. You should restore the original factory default settings only under the following circumstances: O You are experiencing serious problems with your base station, and resetting the base station does not fix the problem. O You cannot remember your base station password. In this situation, you must restore the factory default settings by using the Restore button on the base station, and then use the default password admin to log on to the Base Station Management Tool. To restore factory default settings 1. Open the Base Station Management Tool, and then click Management. 2. On the Management menu, click Back Up and Restore Settings. 3. Under Restore factory default settings, click Restore Factory Default Settings. While the original factory default settings are being restored to the base station, the Power light on the base station turns orange. When the light is solid green, the settings have been restored. If you want to open the Base Station Management Tool after the settings have been restored, type admin as the password on the Logon page. Do not attempt to log on to the base station until the settings are restored and the Power light on the base station is solid green. After you restore the factory default settings to the base station, you should navigate to each page of the Base Station Management Tool and reestablish the network settings you want, or restore the base station settings by using a backup file. For information about creating a backup file of your settings, see the following section. Be sure to establish your unique base station password as soon as possible after restoring the factory default settings to prevent unauthorized users from logging on. For more information, see “Change the Base Station Password.” please rate this answer, thanks

Posted on Jan 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi!

The Factory Default Password for the Microsoft router MN-700 is admin.
If you are unable to login with this password and don’t remember what it was changed to, you can reset the router by pressing the recessed blue button on the back with a paper clip. It will take a while for the unit to reset.
Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

Posted on May 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Kindly nokia 1100 mobile of reset setting solution.

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Forgot user name and password need to add new


Sorry but this is the only to reset the password

Press the Reset Button for approximately 10 seconds

Resetting the Router will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.) and replace them with the factory defaults.

Jun 06, 2011 | Linksys Wireless-G WRT54G Router

2 Answers

I had to manually reset my Microsoft MN-700 Router by pressing in the recessed reset key on the back of the unit, and now i am trying to log onto the Base Station Management Tool using the IP address...


go to start run and type cmd and press entere. A black screen shows up. type ipconfig then press enter. You may have to scroll up but the number next to gateway is the ip address you need to type into your browser to get acess into the router.

Please vote for me

Mar 03, 2011 | Microsoft MN-700 Wireless Router (p5308j)

1 Answer

I forgot my netgear modem router password


If you have changed the default password, you need to reset the router to the factory settings to get in with the default user and password (user admin and password as password, or if that doesn't work try 1234). Note that you will lose the ISP settings and wireless settings when you reset the router.

Here's a video on how to reset the router to the factory default settings: http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

Dec 25, 2010 | NetGear : DG834G 54Mbps Wireless ADSL...

2 Answers

Forgot password for wireless router linksys cisco router


Are you speaking about the password of the router or the password of the wireless network ?
If you don't know the password of the router , then you will need to reset the router and use the default password of the router.
Once you reset the router, you will need to reconfigure it.
If you are looking for the wireless password, you can find it on the set up page of the router.
You will need to open the set up page of the router.

Click here for step by step instructions

Jul 18, 2010 | Linksys WRT160N Wireless Router

2 Answers

I FORGOT MY PASWORD FOR THE WIRELESS ACESS AND I NEED TO USE THE INTERNET ON MY NEW LAPTOP HOW CAN I MY PASSWORD OR RESET THE PASSWORD


connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers http://192.168.15.1
for other routers
http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
If you are not able to access your router with above link then RESEt it you can find RESET button in back panel of router press it for 10 seconds.Then all settings are defaults.
Let me know if you need further assistance.

Nov 20, 2009 | NetGear WGT624 108 Mbps 802.11g 4-Port...

2 Answers

Forgot my network key password


For wireless or to manage the router?
If you forgot the wireless key password, you should be able to get into the router through a web interface and get or reset the wireless password.
If you don't remember the password to manage the router itself, it should have a "Reset" or "Go Local" button the back of the unit. Press and hold that for about 5-10 seconds. This will set the unit back to factory defaults and you should be able to log in again to set up your wireless settings.

Aug 09, 2009 | Belkin My Essential (ME1004-R) Wireless...

2 Answers

Cant acess internet or wireless network,need passphrase


The IP address 10.0.0.1 is a default for some types of network routers including Cisco routers. open it in browser and make LAN and WAN setting of modem and Router Same and security passkey of wireless same ans of wireless lan card and DNS setting same suyyam@gmail.com

Jul 22, 2009 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Hi could you tell me how can i change my wirlles password


You have to log in into your wireless router settings, and do so.
If you forgot the loggin user name and password, you must press the RESET button located in the back of the router, and use the default settings.
To find out the default value of your router, check its manual.

Please don't forget to rate this answer if it helps.

Jul 19, 2009 | NetGear WGT624 Router

Not finding what you are looking for?
Microsoft MN-700 Wireless Router Logo

2,830 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Are you a Microsoft Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...