Question about GE JVM1651 Microwave Oven

1 Answer

I keep getting an f1 message and constant beeping from my oven

The oven is giving an f1 message and constant beeping

Posted by on

  • William Miller
    William Miller May 11, 2010

    Please reply back with your brand and model number so we can help you.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

F 11 code. it is a touch pad error.
If you just cleaned the control panel it may have water in the panel causing a key to stick.
If after a day or 2 it hasn't dried out - then you will need to replace the touch pad.

Visit www.searspartsdirect.com and enter in your full model number for a parts breakdown and schematics.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs 20 sec stops reads F1E5


Error Code/Message - Oven - F1 Error Code - F1 E5

Control displaying F1 E5:

There may be a problem with the Oven Control, or the associated wiring.

Power unit down by turning off the circuit breaker(s) for one (1) minute.

Power unit up by turning on the circuit breaker(s).

Monitor the oven for one (1) minute to ensure the error code does not display again.

Verify oven operation.

Oct 23, 2015 | KitchenAid KEMS309BSS Combination...

2 Answers

Quasar model MQ9968W keeps beeping every few minutes. How do I stop this noise?


Does it display any error code on the display like F1, F2 etc.,?

Mar 07, 2008 | Microwave Ovens

1 Answer

Not working keeps beeping


<- With a full model number from the tag on or in the oven, I may have been able to give you specific help.

Without that essential information, I can only give more general advice.

I would ask for additional information, but FixYa no longer notifies us experts when such inquiries have been answered.

So you would need to post a new help request with the full model number from the tag, and symptom details - what it's doing or not doing, and when it happens.

Jan 20, 2014 | Microwave Ovens

1 Answer

I have a f1 fault


F1 IS A CIRCUIT FAUL YOU COULD TRY AND PRESS BUTTONS 7 AND 8 CONSTANTLY FOR 10 SECONDS THEN TRY THE MICROWAVE IF NO LUCK REPLACE

Dec 25, 2010 | Whirlpool Microwave Ovens

1 Answer

I have Model #JER8750AAB Serial#16776012WK When uising the self cleaning feature, oven stopped and F1 displayed on stove ??


  1. Disconnect power to stove
  2. Gain access to the back of the clock (electronic range control or ERC).
  3. Unplug the touch pad ribbon connector from the ERC. This will be a flat wire approx. 1 1/2" to 2" wide.
  4. Make sure everything is clear and will not short out when power is turned back on.
  5. Turn power back on to stove.
  6. Watch for the F1 and listen for the beep.
  7. If you get the F1 and beep, replace the ERC.
  8. If after approx. 30 minutes you do NOT get the F1 and hear the beep, replace the touch pad.

Dec 19, 2010 | Jenn-Air Microwave Ovens

1 Answer

Where can I get a code book for GE troubleshooting of stove. I keep getting a loud beep and a code F 1 appears. What does F1 mean


Hello & Welcome to FixYa
F1 error code in your Kenmore is displayed when the oven temperature sensor goes bad, before replacing this sensor you can check it with a voltmeter. If it reads between 1050-1100ohms then it means that the temperature sensor is fine and the electronic control board needs replacement. However, after reading your question replacing the sensor is recommended repair. Please get back to me if you have any other questions.

Kevin

Dec 12, 2010 | GE Microwave Ovens

1 Answer

F1 trouble code is flashing and BEEPING how do i get it to Quit


You can pull the AC plug and leave it overnight; the error may be only a momentary glitch.
If the problem persists, you may find it less costly to replace it instead of sending it for repair.
BTW, that F1 could mean different things on different units. You gave us neither the brand nor the model number.

Oct 24, 2010 | Microwave Ovens

1 Answer

The camera is not turning on. The lens is out when it should be inside when its turned off. It keeps beeping when i try to turn it on but it will not switch on.. constantly beeping.


Sounds like you've got a lens error and the beeps are signaling your lens is stuck. With the camera laying on its back, try tapping the lens ring while pressing the start button. You may just luck out. It's about all you can do without taking your camera apart.

Dec 11, 2009 | Microwave Ovens

1 Answer

Whirlpool Microwave Hood Combination MH3184XPS-0 (October 2004), for no reason at all, this morning keeps beeping and running the power setting down from 10 to 1, and just keeps doing it in rapid sequence....


Ours just started doing this exact same thing this past Friday - 12/11/09. What's going on? The cook power just starts beeping all by itself and going from 10 down to 1 over and over again. It may stop momentarily, but then starts again within a minute or so - it's constant until we unplug it. We plug it back in and within a few minutes it starts doing it again. What gives?

Dec 08, 2009 | Whirlpool MH3184XP Microwave Oven

Not finding what you are looking for?
GE JVM1651 Microwave Oven Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...