Question about Sony Handycam CCD-TRV608 Camcorder

1 Answer

CCD-TRV608 I spoke to you the other day about the pinch roller for this. I put the pinch roller back where you pointed out and everything worked fine. The problem is the pinch roller won't stay on. I wanted to see what is missing so I can try to order the correct parts. It's an easy fix I just need to find out what is missing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

You are missing pinch roller lock, its like piece of plastic tube 2 or 3mm (1/8 inch)
This part is not available individually as you need to purchase complete "pinch roller assy" and fixing it requires skills and experience of camera repair.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keep getting out of paper error and paper wont feed makes loud grinding noise


A screw or something else is in the printer not allowing the gear to move freely.

Apr 22, 2015 | HP C6280 Photosmart All-in-One Printer...

1 Answer

Ad-f410 change pinch roller


Why do you want to change the Pinch Roller? Most of the time they just need a good cleaning and other things in the deck like back tension checked. Pinch Rollers are only changed if they are cracked and I have seen few cracked Pinch Roller in 40 years.

May 02, 2014 | Audio Players & Recorders

1 Answer

Teac x-1000r tape skewing off pinch roller


In the Teac X1000R this is most often caused by dirty Pinch Rollers and secondly bu a ring of oxide or a wear mark being developed into the capstan shaft. If cleaning the Pinch Rollers does not do it then a trip to the technician is required. These decks also have a touchy servo tension system that if upset can also contribute to the failure of this kind. I still work on these in Chicago area all the time. Russ the other ex-Teac guy is in New Jersey. Be careful of local shop with this model as many of them turn up the servo tension to resolve this problem which is the wrong thing to do that then burns out parts and the cost goes up. I have seen this mess many times as people bring me these decks as a last stop-- of course I fix then correctly with the use of the Tentelometer as is required. Pinch Rollers are often reconditioned with Naphtha after cleaning then with Denatured alcohol.
Teac Tascam Repairs Skywave Tape Deck Repair Bensenville IL

Mar 14, 2014 | Audio Players & Recorders

1 Answer

Reel to reel will not play


You do not mention the brand or model number which to answer the question effectively is needed- different machines are designed in different ways. The function of the fast wind and the play mode only differs in that in play a capstan is involved that regulates the speed and the reel motors just do the take-up of taper and a little back tension for the supply reel. You may have either a sticky Pinch Roller linkage or a non- rotating capstan shaft that might point to a loose or broken capstan drive belt. There are also the condition of the Pinch Roller surface and the surface of the Capstan shaft that can be glazed or rubber hard and non-compliant. The rubber Pinch Roller can be re-rubbered, the capstan shaft can be reconditioned and the Capstan Belt can be replaced. Capstan bearings and motor bearings need oil once a year as well. I hope this helped to some extent- I have been working on decks now for better than 40 years.

Dec 12, 2012 | Audio Players & Recorders

1 Answer

Tape Wont Play


My advice is that you should by a cleaning cassette. Put this in the camera and run it for 10 to 20 seconds only. running the cleaning cassette for a long time may damage the head.
good luck!
Luwangula

May 10, 2009 | Sony Handycam CCD-TRV58 Camcorder

1 Answer

SAMSUNG CLP 300N prints poorly after replacing toner cartridge


This is a fairly common problem, caused by a faulty black developer roller. I spoke to Samsung about mine, when it was 1 day out of the warranty and explained it started happening three weeks before (which was true). It had about 1,300 page count, when fuser kit should last 20,000. An engineer visited next day and replaced the roller, as well as a cautionary replacement of the paper pick-up rubber. Print is back working fine now. Chatting to engineer, the rollers have been modified now, so the fault must be causing concern. He said he's got another ten coming in stock tomorrow. Keep the previous toners, as they will still work once printer is fixed. I must say, Samsung support is excellent (the reason I bought from them!), so speak to them and so what they will do.

Nov 24, 2008 | Samsung CLP-300N Laser Printer

1 Answer

How to replace vaccum belt on a hoover tempo


Turn the machine upside down. Take the screws out of the bottom plate and remove it. take out the brush roller and old belt. Wrap the new belt around the metal shaft of the motor first and put the roller inside the belt loop and use the roller as leverage to stretch the belt up to the brush housing and slide the roller in place. Give the roller a spin by hand the make sure everything moves freely before you use it. It should spin with out much effort, if it doesn't you probably have the belt pinched, and you need to free it up before putting the bottom plate back one. It will take a little elbow grease, but it will go on.

Hoovers usually list what kind of belt they take on the serial tag.

Good Luck

Nov 22, 2008 | Hoover Vacuums

3 Answers

Re: Model PV-4523S


You can try cleaning it with a VCR tape cleaner to see if the pinch roller have build up on there. It could be that the motor isnt feeding the tape up against the recording heads properly and may need an adjustment. If you can take the top cover off, you should be to see what the problem is by the way the tape is being inserted into the machine.

Jul 29, 2008 | Panasonic PV-V4021 S-VHS VCR

3 Answers

How to change belt on hoover soft and light supreme


Turn the machine over so you can see the bottom. If you look carefully at the plate that covers the roller, at the back behind the brush opening on either side, there is a clip that is recessed and you can push it with a flat blade screwdriver as you lift the plate up. This will allow you to take the plate off and remove the roller. Put a new belt around the roller pulley and insert the other end of the belt through the opening in the roller housing of the machine and re-install the roller. once it is installed, rotate the roller by hand to make sure that the belt is not pinched. Replace the bottom plate and rotate the roller again. The belt is running between two guards and it is possible to pinch it and damage it. This is why you rotate the roller by hand, to ensure that it is not pinched.
Now, if you look at the back wheels, on the side of the machine where the hood meets the bottom, there is a clip on either side that you can pry on gently and this will release the back portion of the hood. To release the front portion of the hood, there are similar clips located at the back corners of the bottom plate. Basically, you are prying the hood away from the base of the machine and releasing it. Now, turn the machine over, (back on it's wheels) and lift the hood off the machine. The handle of the machine should be down for this. You will see the belt where it comes through the roller housing and you will have to grab it and pull HARD and stretch it around the motor shaft. Once it is attached, rotate the belt and roller by hand to make sure that everything turns easily. Replace the hood and press the sides gently. You should hear and feel the latch/clips snap into place. If your machine has a height adjustment, there will be an adjustment knob that will have come off when the hood was removed. Replace the knob and you are done.

Feb 02, 2008 | Hoover Soft Light Supreme U4262-930 Bagged...

Not finding what you are looking for?
Sony Handycam CCD-TRV608 Camcorder Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

102366 Answers

Sheryl Bahr
Sheryl Bahr

Level 2 Expert

65 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...