Question about Sharp 13VT-R100 13 in. TV/VCR Combo

3 Answers

The universal remote does not bring up the menu so I can program all the cable channels in it. I don't know what to do. It is only receiving non cable channels. Help me so I don't have to keep watching hannah montana on my big tv. lol Any suggestions?

Posted by on

  • ignitiusfire Apr 08, 2008

    I bought this tv at a yard sale. It came with a universal remote. I can only get 3 channels, unless punch in each code separately, ie. 01, 02, 03. The up channel button only scrolls through 3 channels and the menu button doesn't work, as you have also discovered.

  • run4dayz Aug 02, 2008

    The universal remote does not bring up the menu so I can program all the cable channels in it. I don't know what to do. It is only receiving non cable channels.

×

Ad

3 Answers

If You have a cable box. Program your Tv to it and use the set up or menu button yo program it.

Posted on Aug 06, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Alot of universal remotes dont let you program your tv with them due to how much more mem they would need. you have to use your actual tv remote or do it manually with the tv. sorry

Posted on Jul 29, 2007

  • scott gregg
    scott gregg Aug 01, 2007

    i think thats the same thing i said.....

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

The programming is done through the remote control. The best thing to do is to get an original remote for that TV and it will have the buttons necessary to program that TV. The next best thing to do is keep buying universal remotes until you find one that has the buttons you need.

Posted on Jul 29, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mitsubishi tv model cs27200 and I dont have a remote. I got a universal remote but it wont bring up the menu. I need to program the channels for cable. I only get local channels without bringing...


You would need to look up how to program that remote to your specific tv. I would look up the owners manual if you dont have it for the remote...and follow the instructions for it. However, you will have to directly use the tv to program it to the cable. The universal remote will only change the channels and volume for you. Use your menu button to bring it up, make sure its set to cable and not antenna, and use your channel + and - to navigate through the menu and vol + to select your option

Nov 20, 2010 | Televison & Video

1 Answer

I have a sony trinitron about 27 to 32 inches. it was left in the house when i moved in so there is no manual and no remote. I bought a universal remote that works but the tv is programed to certain...


Hi, if you have the remote control you go in the menu and you browse to set up and you choose air/ cable
and you set it to air or cable thene you press enter then you look for channel programing and press enter
and you will be don if dont have a remote you have a
menu button on the tv set push on and you browse
with channel up or down and select the option you want with volume + as i describe in the text.
hope that will help
have a nice day

Mar 28, 2010 | Sony FD Trinitron WEGA KV-32FS100 32" TV

2 Answers

I cant to program my cable channels with my univ remot sony tv


do it manually, front panel controls, or buy sony brand universal at wallymart

Jan 01, 2010 | RCA Universal Remote Control

1 Answer

Codes not working, need to bring up menu on tv


Yes , Most Rca will not work so you need something that has more codes, Let me give you a website to checkout www.remotes.com, These people will not only help you but they will find a remote that will work for your TV, Give them a call as well they do have codes and remotes for all TV's you be happy you did. Do not shoot the messanger give a good rating.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Jul 10, 2009 | Universal Remote Control DIRECTV Universal...

1 Answer

13'' Sanyo tv skips from 47 to 95.


will probably have to have the remote or a universal will work.....cable tv remotes can be programed to work with most any tv. occasionally you can hold certain button configurations on the tv it's self to bring up the menu then do an auto search

Jul 07, 2009 | Televison & Video

2 Answers

Sanyo ds 27510 tv no remote want to setup my tv with an antennea,wont switch from video 2


If it has a MENU button, press it and use the volume up and down to manipulate the choices, press menu again when you get to channel setup. you want AIR if using off air or Cable for cable. Next screen should say start and press menu again, the channels will start to cycle. If htat doesnt do it, you have a new model than the one I just did tonight. OneForall remotes will probably not have the setup button you need to autoprogram. Best bet is to find a Sanyo made universal remote or other Sanyo remote on Ebay as alot of the buttons are proprietary to manufacturer. Some TV's are useless without their own remote if not on a external tuner (cable SAT or digital)

May 13, 2009 | Sanyo DS27510 27" TV

1 Answer

Programming


using the menu button on sthe tv; go to setup, select cable, then select autoprogram and let it search for your channels.

May 09, 2008 | Televison & Video

1 Answer

Proscan model 52690


You can get the Phillips universal remote that will work that tv at the following link with free shipping. The phillips universal is one of the best remotes for a universal and easiest to program also
http://servicemanuals.vstore.ca/

Apr 13, 2008 | Proscan PS52690 52" Rear Projection...

1 Answer

Hitachi


Go to menu look under cable/air switch to cable if you have cable then look for Auto Programming press go this will then automatically program all channels that you reviced, a universal hand unit can not do the things that your hand unit can do ! If you need more help let me know.

Jan 18, 2008 | Televison & Video

3 Answers

RCA T19064 - HOW TO GET TO MENU


i have the same set i used a rca universal remote rcr311w i think its the oem one i bought two of them at walmart i don,t know if they still carry them 

Sep 09, 2006 | RCA T13208 13 in. TV/VCR Combo

Not finding what you are looking for?
Sharp 13VT-R100 13 in. TV/VCR Combo Logo

Related Topics:

832 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...