Question about Sharp AR-5316 Advanced Digital Imager Copier

2 Answers

F5 - 2

Long time running but not ready blinking f5 when press start blinking 02
please send me agoog reply i,m engineerer asst

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

F sign appears blinking

Posted on Feb 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

F5-02 - Exposure lamp blown
**ALWAYS DISCONNECT POWER BEFOE WORKING ON MACHINE****
Check the exposure lamp, if defective replace.
Check inline exposure lamp fuse, if defective replace.
Also check flat cable from CCD to MCU PWB , if cut or defective replace.
Last -- brds (boards)

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In tvs speed 40 printer all led light are blinking


follow these steps
1) Press ST1+READY button together
2)Turn on the tvs speed 40plus passbook printer
3) The 4 LED will blink 4 times. Release the button ST1+READY immediately after 4 blinks
4)PRESS ST1 - ST1+READY+EJECT starts blinking
5)again PRESS ST1 - ST1+EJECT+ST2 starts blinking
6)again PRESS ST1 - ST1+EJECT starts blinking
7)again PRESS ST1 - ST1+EJECT starts blinking
8)again PRESS ST1 - READY+EJECT starts blinking
9) printer is READY wait and PUT PAPER.
10) The paper goes in and comes out 3 times. will take about 2 minutes.
11) Paper ejects automatically after printing.
12) turn off the printer and turn it on.

Jan 24, 2014 | Printers & Copiers

1 Answer

If I am not printing continuously, the printer does not print the first 5-6 printing jobs. When print job sent to the printer I get a blank page (printing job can be more than one page). After the blank...


Hi there,
It seems that " Print on both sides (Manually)" is selected in printing options., when you want to print any document Go to file Print > select printer and click properties and disable the Manual printing option in device settings.
You should be able to get printing without errors,
if the option is not checked then check for the default paper tray,
save the settings and reboot your laptop/desktop and restart printer as well so that settings should work properly and any given command gets clear from memory, If these all settings are ok, Uninstall the printer driver and download the latest version drivers from HP website and install see links below
hp LaserJet 1150/1300 printing system hp LaserJet 1150/1300 PCL5e driver

If you require more assistance feel free to reply to this post
Regards, BA

Jan 14, 2011 | HP LaserJet 1150 Printer

1 Answer

Blinking alternately H and 4


This should get you up and running,

Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Feb 11, 2010 | Xerox Printers & Copiers

1 Answer

Dear Sir / Mam My self Ashish B.Kaple I am an Engg.(B.Tech.Mech.) working as Asst.Manager-Production I have got mail on 08/09/09 from offer@siemensoilandgas.co.uk this email id for this job....


I think its a fraud mail because i searched for uk work permit and in it its written that company that employs you have to apply for work permit,an individual cannot apply himself directly for a work permit,also we indians will not qualify for a tier 1 visa due to our education not recognisable in uk hence we get no qualifying points for education.minimum points reqd is 75.

Check this list of all scammers in Oil Marine Industry - http://www.oil-offshore-marine.com/bewarejobscams.php

Sep 18, 2009 | Epson Stylus NX400 InkJet Printer

2 Answers

Printer would not run


open the front door thenremove ik cartridge then check there is not any paper jam.then restart the printer.

Jan 09, 2009 | Brother HL-2040 Laser Printer

2 Answers

Sharp AR-5320 B & W copier giving F 5 alternatly.


thinksssssssssssssssssssssssssssssssssssssssssssss

Oct 07, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

Canon pixma ip1000 problem


you have to reset your printer


1. Unplug AC (and usb just for good measure)
2. Hold Start while plugging in...
3. While still holding Start press Resume twice.
4. This then allows for Removal of Ink Cartridges(if you are past the limit)... a very important step apparently.
5. Now repeat Step 1... Step 2
6. Now press the Resume 4 times (only blinks for 1st two presses !)
7. Should be ready...

Sep 26, 2008 | Printers & Copiers

3 Answers

Pause & ready led blink alternatly after initilize


Check if the paper type is set correctly (in thebackside right there is a lever to set continuos paper, or single sheets).

May 03, 2008 | Epson FX 1170 Matrix Printer

2 Answers

Remove error in AR-5316


Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Apr 15, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...