Question about Durabrand DWT1905 TV

1 Answer

TV problem I just recieve a durabrand tv from a friend, and he doesnt have to remote for it. When i got home i hooked it up to my Direct TV reciever, and when i turned my tv on it is on VIDEO mode. How can i get it off of that mode?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: TV problem

You will need a univeral remote, and the code for that TV. Most of the One For All products work, made my UEI inc, very easy to find. The remotes that come with most cable TV providors also work. Once the remote is programmed, use the video key to switch modes. I have had both Mediacom and Comcrp cable while I've had my TV, and out of the 5 (yes, 5!) different remotes, all of them have worked flawlessly with my TV and operated all fucttions.

Posted on Jul 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Is this tv capable of receiving digital signal from directTV

The direct tv reciever has a coax output that will send a signal to channel 3 or 4 that any older telivision can the answer is yes. You obvously need a direct tv reciever to watch direct tv on any telivision.

Nov 26, 2009 | RCA E13319 13" TV

1 Answer

Where to plug in the home theater on the tv?

If you REALLY want to plug your tv into your home theater system there should be rca (red and white) jacks on the back of the tv that say "audio out" or "speaker out" thats your tv's audio output. which is where you would plug in the TV to your home theater system.

But there's really no reason to do this and its not the most desirable way to set u a home theater. Sound doesnt come from your tv, and therefore your tv shouldnt be plugged into speaker (unless you have old school wal cable) sound comes from your cable box, DVD player, VHS, Xbox, Ps3 etc. the sound comes from your source, and these sources should be hooked up directly you your home theater reciever

Oct 01, 2009 | Dynex Standard (CRT) Televisions

1 Answer

Cant find code to work our durabrand tv

if ur directtv remote works withy ur tv use it i have a tv that can not use certian remotres cause it has am/fm radio/dvd/vcr/tv so some remotes just are not in to off brand or multi use fuctions

Nov 13, 2008 | Durabrand BH1304D 13" TV

1 Answer

Durabrand D41901

Are you wondering if this Durabrand TV is going to be ok in 2009 when Television goes all Digital?

This will not affect cable TV users only people trying to recieve TV over the AIR UHF/VHF will be digital signals now and will require a special tuner to recieve them.

Most durabrands have Analog/Digital tuners but they are analog TV's.

May 10, 2008 | Durabrand DWT1905 TV

1 Answer

Can't figure out how to get s-video conections to work

to use s-video have to switch tv/video to video input

May 03, 2008 | Durabrand DWT2704 TV

1 Answer

13' durabrand

Re-search the remote forums. I just posted a fix using a Direct TV remote. Enjoy! :)

Jan 06, 2008 | Durabrand BH1304D 13" TV

3 Answers

Hooking up a dvd player to my durabrand tv

If it is a durabrand dwt1304, you cannot switch the input to EXTERNAL (the front jacks) without a remote. There is a good one at Radio Shack for eight bucks, the 3-in-1 remote. The program code is 0171, and you switch the TV inputs with the A/B button.

Dec 13, 2007 | Durabrand DWT1304 13" TV

1 Answer

Sharp 27F-630 27" TV

Dear eligas1312, Most probably your antinna is not reciving TV signals properly.Try to adjust it in a right direction at a proper height, also adjust frequency of various channel of Direct TV through menu button. regards ajay

Aug 04, 2007 | Sharp 27F-630 27" TV

2 Answers

Having trouble hooking up my DVD player

Try looking on your tv's menu for "input" or "input select". This should allow you to switch to your front AV inputs. If that doesn't work hook into the coaxial cable in the back of the set (the one for your cable or satellite input. Plug the cable from the output or to tv side of your reciever into the input of the dvd player and run another lenghth of coaxial cable from the output of the dvd player to the coaxial input where your satellite or cable was plugged into the back of your set. When you want to watch a DVD just turn on the DVD player and the picture should come up. When you turn it off your satellite or cable should come right back.

Feb 20, 2007 | Durabrand DWT1905 TV

12 Answers

Durabrand model BH2004D

I am not sure about Direct TV but dish network does not allow the hookup to go through their must go through the TV only. Speaking with Duraband at 1-800-256-2487 confirms you have to have a Duraband remote and universals won't program to it. Ask for parts dept. and order a new remote. Sorry - not good news for me either!!!

Dec 09, 2006 | Durabrand DWT1905 TV

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66533 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Durabrand Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides