Question about Datacard SP35 Printer

1 Answer

Card jam Hello, I use sp35 card print, I have a problem. Card jam When I print the card, the card will go inside and stop it. no print. I see this card edge on the meddle roller. I chage the ribbon and clean the head and rollers, nothings to solve this. How can i solve this problem. pls help me, thanks. Naing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have to change the roller just inside the picker roller.

Sometimes the glue that holds the "cleanig roller" loosen from the pin.
Sorry, bad english... :D

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My datacard sp35 will only print in yellow. What


Do you get any errors?
1 st unplug and plug in to reset power
2nd replace print ribbon with new one, could be bad ribbon or bad RFID tag on the ribbon
3rd try printing a different card
if still not working i would recommend sending in for service.
Contact MidWestIdSolutions.com for more info.

Jan 06, 2010 | Datacard SP35 Plus Printer

1 Answer

When i try to print card it causes a paper jam all time. it used to print card but not now i feel this is a grat pity cause its a good printer. It doesnt matter which place i put card it just will not lift...


fter a clear card option has been installed in a Datacard card printer SP35 Plus or SP55 Plus, a card jam error my occur. The same error may occur when after replacing the main control board.
To clear this error the printer will need to determine the sensor type. For the printer to recycle through and make this determination, a power on test card is required using the appropriate clear or opaque card type to force the firmware to redetermine the sensor type. Each time the card is changed from clear or opaque to the other type, a power test card will be necessary to redetermine the sensor type.
For additional information about Datacard printers currently on the market, SP25 Plus, SP35 Plus, SP55 Plus and the SP75 Plus, contact our id card experts toll free at 888-485-4696.

Nov 19, 2009 | Epson AcuLaser C4100 Printer

1 Answer

Does anyone know of a roller repair kit for SP35. the rollers are hard and will not grip the card, to drive them thru the printer. they get half way thur and jam


A good clean using the cleaning cards should help.
how far does the card get into the printer?
Does it pick a card from the hopper OK?
You can replace the top rollers easily yourself, but the others would need to be done by an authorised reseller

Jul 17, 2009 | Datacard SP35 Printer

1 Answer

Ribbon is breaking constantly in every print of card


in order of most likely
1 edge to edge settings in printer tool box are off.
2. print ribbon carriage (blue part you put the ribbon on is bad)
3. Bad ribbon
4. dealer needs to service to calibrate print head temp
tulsabiz.net for more info

Mar 27, 2009 | Datacard SP35 Printer

1 Answer

Datacard SP35 + giving broken ribbon error


You have to clean the roller under the printerhead.
The big black one..

I suggest you install Diagnostics.

Go to motor test, and take the transport fast reverse. 300 sec.

Now you can clean the roller easy.

Nov 25, 2008 | Datacard SP35 Printer

1 Answer

Card printer is not printing in colour


You have probably bought fake color ribbons , or you have taqken of the blue cup with the rfid inside.. Wich tells the printer what kind of ribbon installed

Nov 19, 2008 | Datacard SP35 Printer

1 Answer

Printing faintly


It sounds like the printhead temperature needs to be increased in the print driver. This will enhance the color and density of the ribbon transfer to the card.

For techncial assistance for id card printers by blog, visit our blog at www.safecardid.com/blog

Nov 04, 2008 | Datacard SP35 Printer

2 Answers

Data card sp35 plus ribbon break


There could be either of the following issues:

1. Check the print head temperature to make sure that it is hot enough to transfer the ribbon to the card.

2. The surface of the PVC card may not be image compatible. Try another brand of card or opt to 60/40 composite cards for testing.

For technical assistance by blog for id card printers, see our blog at www.safecardid.com/blog/

Jun 20, 2008 | Datacard SP35 Printer

Not finding what you are looking for?
Datacard SP35 Printer Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Datacard Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Datacard Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...