Question about Toshiba 50H72 50" Rear Projection Television

1 Answer

5 year old RCA 50 inch projection tv. Picture went off.

The sound is good. Replaced the bulb. I now have a picture but it is distorted especially colors. The red colors are brown, like UPS brown. Any suggestions.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If you are using component cables make sure they are all connected properly( pushed all the way in and in the correct input). I have seen the red cable come loose several times and cause no red color in the picture. When you change the lamp it is easy to pull on one of those cables and cause it to come loose.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After about 30-60 minutes TV starts to hum and picture gets distorted, could this be the color wheel...???


Sounds like a sync problem due to color wheel speed. clean and lubricate color wheel motor with tiny amount of Z-Max lubricant (liquid Buckey balls, available at Wal-Mart), on each bearing. make sure wheel is free-wheeling and turns easily. Should cure problem. If the color wheel is in good shape, there is a power supply problem, which may be due to dried out electrolytic capacitors or a regulator that's failing. Troubleshooting or controller board replacement may be needed. Regards.

Dec 07, 2015 | Mitsubishi WD-73840 73" 3D Home Cinema...

1 Answer

After lamp replacement, why is picture still green?


it seems like the green was not defective before you replaced the green. remove the red =no change in the screen color, that could be bad. put back red, then remove blue=screen color changed, blue is good, hope you got the idea.

Oct 08, 2015 | Sony Televison & Video

1 Answer

Color stays red all the time. all 3 bulbs are


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 06, 2010 | Philips 60P8341 60" Rear Projection...

2 Answers

Panasonic pt43lc14 no red color. picture is good. cannot get anything to look normal color after trying to adjust color/tint/picture etc. Have alot of blues and yellow, and brown. seems like no red.


It appears that your light engine is broken, I have the same problem. Have you recently changed the bulb with a non-panasonic part bought on the internet. I did this and think thats what caused the problem. I believe the new bulb burn at a higher temp thus causing damage to the Light engine filters

Jan 04, 2010 | Panasonic PT-43LC14 43" Rear Projection...

1 Answer

Vertical Distortion fix for Toshiba 32 inch TV


You have bad capacitors and possibly a vertical IC that is going bad. And check for bad grounds in and around the IC and caps!

Dec 10, 2009 | Televison & Video

2 Answers

Sony KDS-50A2000 - bulb replaced but picture still yellow


Hi,It sounds like a light engine problem Sony is having.Basically the light of the lamp goes through tunnels that have mirrors that direct the lamp to 3 main LCD chips,These 3 LCD chips are blue,green, and red they blend to create the image and colors.When they start to fail you'll get color discoloration like what you are getting.You will need to replace the optical block because unfortunately they don't sell the LCD chips by themselves.GOD BLESS YOU!

Oct 06, 2009 | Sony KDS-50A2000 50" HDTV

1 Answer

When tv is turned on the picture is distorted.thought at first that one of the bulbs was bad.took the screen off and all bulbs are lit.the red bulb looks distorted.has the bulbs got to go out to be...


Can you explain distorted in more detail?

Does the screen look 3D?  
Can you adjust the convergence for both the blue and red colors - up - down - left - right? 
If not the convergence chips and resistors are shot and should be repalced. 

If however the screen is shrinking and expanding that is a different problem.  You can get a repair kit from www.TvRepairKits.com for this model. 

Dec 10, 2008 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

RCA D52W20 52in Rear Projection TV/ Picture


Sounds like someone has put a magnet near it or picture projection from rear may have moved is the picture fine other than tinting?

Jul 21, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Toshiba 50 rear projector tv


can you post a picture of what the picture looks like? I may be able to help if I can see what the picture is actually doing.

Jun 08, 2008 | Toshiba 50H82 50" Rear Projection...

5 Answers

Toshiba 56HM195 56 in HD DLP Loud Buzzing and color distortion


If the sound, sounds more like a Hum with some vibration chances are the Cooling fan located behind the lamp is going bad, about $20 to repair, if its a high pitch hum most likely the Color Wheel and if thats the case about $30.
Good luck, my fan just went bad now seeing green dots everywhere, so debating on just junking it out or fixing it, with winter coming on might just breakdown and buy LCD and say the heck with DLP from now on.
Good luck to you..

Jan 27, 2008 | Toshiba 56HM195 56" Projection HDTV

Not finding what you are looking for?
Toshiba 50H72 50" Rear Projection Television Logo

833 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73056 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...