Question about Symphonic SC3919 Combo

1 Answer

How do I program my Yamaha RAV240 Remote control? Lost intruction book

I had to order a new remote control for my receiver and it did not come with instructions...I can't find the instruction manual...can you tell me how to program it with the universal codes for the TV, DVD, VCR and cable? Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: How do I program my Yamaha RAV240 Remote control? ...

Here's a link to the site you can download the sheet of codes for all types of devices. Just choose RAV240 from the Remote RAV Model Number field.

Posted on Jul 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I input the remote codes on an Apex GT2715DV

Refer to the instruction manual included with the remote. It should contain the programming codes and instructions.

Jun 19, 2012 | Apex Digital GT2715DV 27 in. TV/DVD Combo

1 Answer

I bought a replacement remote control for my tv and doesnt work, how do i get it work? I put fresh batteries, reset the remote, and pressed the tv/dvd button. model MD14FP1

Have you make sure you were sent the correct one, according to the info for the model you give the replacement remote should be a 72796929 and it's available through the for about 10 dollars. If you got a universal or programable remote then you'll have to try the code search procedure listed in the instruction manual. If you have the correct remote(part number) then there is a problem in the IR receiver panel or the IR receiver itself. If you have a universal remote you might want to try the dvd codes also because you have the combo/TV

Apr 07, 2010 | Toshiba MD14FP1 14 in. TV/DVD Combo

1 Answer

How do I retune DMTech TV Freeview with DVD video please?

Please fallow bellows instruction to retune your TV.
Also please don’t forget that MENU BUTTON from your remote, it’s not the one in the middle of remote.
There are the other MENU BUTTON in left down bottom side.
Cannot access Digital TV and am asked for a Lock code Key?
If you cannot access the Digital TV option then conduct an EEPROM RESET as mentioned above. If you are prompted to enter a lock code key enter three / four zeros.
Alternatively when prompted to enter the lock code key conduct a FIRST TIME INSTALLATION also mentioned above.
There are two options available. The first option is to conduct a general reset that will reset all user preferences. The second option would be to conduct an EEPROM RESET. An EEPROM RESET would reset all the internal hardware.

Instructions - Please refer to your DMTECH remote control and user manual provided
1. Turn the Television ON ? Button on front of Television / Power button on remote control.
2. Make sure that you are on Analogue television by pressing the TV/DVB-T button until you see PR and the channel number selected in the top right corner of the screen, e.g. PR 1.
3. You must then Press the button labelled Display until a window titled INFORMATION is displayed on the screen.
4. Only when the window titled Information is present can you continue by pressing the digit (1) twice and then pressing the button titled LINE. If you make a mistake then press Display again to remove the window titled INFORMATION and repeat the process. (Display - 1 1 - Line)
5. Once you have successfully completed step four you will notice that a menu appears on the left of the screen. You can then select which option you want, either RESET or an EEPROM RESET using the arrow keys. To execute an instruction please use the RIGHT ARROW KEY and not the ENTER button.
Make sure you have properly conducted a FIRST TIME INSTALLATION and an AUTOMATIC SEARCH. If having done this you can try conducting a manual search in an attempt to force / lock the channel.
This will erase the DVBT tuner memory and reset the interface card. This may resolve poor channel reception, the inability to store channels or even receive certain channels.

Instructions - Please refer to your DMTECH remote control and user manual provided
1. Turn the Television ON and select digital television by pressing the button labelled TV / DVB-T located under the power button on the remote control.
2. On the remote control locate and press the button labelled Menu, found at the extreme bottom left of the remote control.
3. A Menu should now appear displaying options. Scroll down and select the option labelled SETTINGS using the ARROW KEYS and the enter key located in the middle of the remote control. On the next menu you must select INSTALLATION to move on to the next menu.
4. On this last menu scroll down to the last option labelled FIRST TIME INSTALLATION and select it pressing the enter key. You will then be prompted to delete all channels, using the left arrow key to select yes and press enter to execute. The television will reset and prompt you to commence an AUTO SEARCH. Follow these instructions to tune in channels.picture
Digital Television requires much more from existing aerial systems. Having more than one digital TV may reduce signal quality and strength depending on how the aerial system is set up. It is therefore recommended that if you decide to use more than one digital television you use a booster and or at least make sure you are using a digital ready aerial. Using an existing Aerial that is split may reduce signal strength depending on how many times it is split. Please see the diagram below. The best solution when using an existing aerial is to purchase a booster device. Aerial Splitting - Why a booster is recommended. A booster is used to apply a small current that boosts the existing signal. A booster can be purchased from all main TV/HI-FI - consumer electronic product retailers.

Jan 16, 2010 | Combination Televisions

1 Answer

Can you tell me the link code for a panasonic remote LSSQ0245

  • AGA600 - Panasonic AGA600 Universal Remote
  • AJ-RC5 - Panasonic remote control Operating Instrutions AJ-RC5
  • AK-HRP931P - Panasonic Remote Operating Instruction

Sep 10, 2009 | Panasonic PV-DM2799 27 in. TV/VCR/DVD...

2 Answers

I have a sony tv and lost manual for my sharper image jumbo remote can you help me with what to do

I have the manual and codes in a pdf. If you would like a copy just email me at and I will send it to you. All I ask is that you leave great feedback on this site.


Jun 13, 2009 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

2 Answers

Need 3 digit code to reprogram remote

Have you call your tv manufacturer, they will tell you to purchae another remote or if you have a menu" button on the front of your tv they will reset it for you . Hopes this helps!

Feb 26, 2009 | Symphonic SC313D 13 in. TV/VCR Combo

1 Answer

Instruction manual

Hello, a manual for the Daewoo GB20H1T is available here:

I'm not positive, but I'd imagine the GB20H1T and H1TS are compatible as far as the manual goes.

Feb 17, 2009 | Daewoo GB-20H4T2 20 in. TV/VCR Combo

4 Answers

Codes for 20" Digistar model tk2055d tv remote


I suffered for 1 month shopping around for an universal remote control that has a code for the Digistar tv brand. It was in vain.

So just turn to the simplest way ..the programming with code search (on the guide of the universal remote control- which has not the code for digistar brand) In the paper it tell you exactly what to do. I bought a 3 device universal remote control.
On mine it showed five easy steps to follow and the remote finds itself the code and programs it .You do not put any code ever, the remote just simply WORKS perfectly. I have solved this problem just 5 minutes ago..Oh ...I forget..On the universal remote control instruction it said that you might have to press the ON/OFF button up to 200 times , so i thought "I never tried this one, better then waist days and months will no solution. I nedded to do it only for 30 times or so beffore the TV turned OFF, and than I pressed the ok button on my remote (probably to save it- or who cares-as long as you follow the instructions). Then I could turn back on the Tv and P{LAy with the remote without putting any code as the remote it programmed for the Digiistar brand..I'm so HAPPY...Try it and spread the "new"...It is Ironic was there all the time...we look in more complicated zones and do not see the solution sitting under our nose:((:)))

Oct 19, 2008 | Combination Televisions

1 Answer

Universal remote control

Try this has instructions and search codes
Hope this helps ;-)

Oct 09, 2008 | Combination Televisions

1 Answer

Remote control

I used a GE Universal remote. The package has number 24921 and the instruction manual says it's a RM24912. Anyway, this model will control pretty much all aspects of this tv combo assuming we are talking about the KLH KDT133UY tv/dvd.

What you need to do is program the tv button on the remote to code 0029 which is a KONKA code. The real maker of KLH electronics. Then set the dvd/vcr button to code 0905. Now in order to access the tv menu, press the tv button then press the shift button which is the setup button. Then press the INFO button for menu. SHIFT, MENU, OK, and EXIT are printed with a black backgroung on the remote. Hince you need to press shift.

Took a while to figure it out, but here you go. Good Luck!

Nov 20, 2007 | KLH KDT133UY 13 in. TV/DVD Combo

Not finding what you are looking for?
Combination Televisions Logo

2,809 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

66373 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Are you a Symphonic Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides