Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

1 Answer

The motor will not spin..... can i have a diagram of a motor of ultimate care ii washing machine

Posted by on

  • dels_mecs Jan 30, 2009

    can i have a wiring diagram of a motor

  • lorikay819 Jan 30, 2009

    I think I have the same problem- the tub does not spin during the rinse cycle.  It makes a slightly louder noise and when I lift the lid and put it back down it will start spinning again.  Any advice on how to fix it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

The typical problems with "the motor will not spin" is a:

1. Lid-switch (very frequent): Will not drain, incomplete cycling, switch ultimately passes power to motor.
2. Belt or coupling (very frequent) - Belt moves when motor spins
3. Timer/control board (rare)
4. Tranmission (rare)
5. Motor (somewhat rare)

How do you know the actual motor is not spinning? Do you mean, the tub not spinning? Do you have a noise as if the motor is spinning?

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine from whirlpool, ultimate care II spin cycle is not working. I tried to spin it manually to get a jump start, but its not working. Is there a way i can fix this my self?? Thanks


check the lid switch...if the lid switch is good check the direct drive coupler located between the motor and the transmission its a plastic and rubber piece u need to lift the front of the machine up and look under the motor between the motor and transmission..

Oct 25, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool washer ultimate care II will not spin motor is working


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 26, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

My whirlpool ultimate II washing machine fills up and agitate but does not spin or drains the water out. how can I fix it.


You have a bad motor. Your washer is a direct drive machine. It turns in one direction to agitate and the other direction to both spin and to pump. You have lost one direction in your motor.

Oct 18, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will not spin.


May be the coupler between the motor and the transmission.

Sep 08, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate Care II - making funny noise


this is probably a bad motor coupling, you have to take the cabinet off, then the drain pump, then the motor, the coupling is located between the motor and the trans

Aug 06, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate Care II will NOT spin on the last spin but


your timer may be going, that setting may be worn out. also a motor coupling may be the culprit

Jan 25, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

The washer doesn't spin out the water. Clothes come out soaked?


if it washes ,,check your lid switch,,if it doesnt wash and spin check your motor coupling...onthejob

Jan 10, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...