Question about Canon PowerShot A410 Digital Camera

1 Answer

Display problem when i take picture in day or in some light loaded picture apper white display Why?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

Sounds like your shutter may be stuck. Turn off the flash (so that you don't blind yourself), then look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter/iris quickly opens and close. If no movement is seen then the shutter is stuck. Unfortunately, professional repair will cost many times the current value of the camera. But you can try the following fix to try to unstick it:
http://www.fixya.com/support/t295396-canon_s2_black_screen

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a flashing red light where the white light should apper


it might be your power cord, if the battery is empty and your powercord no longer working, the light will flash red to indicate it has not enough power to turn on. Try a different powercord for the same model, or have your current one tested at an electronics store.

Aug 30, 2014 | Dell Computers & Internet

1 Answer

WOODS 59018 TIMER WIREING CORRECT INSTALLED WITH POWER OFF NETURAL GROUND UP TO CODE LOAD /LINE PROPER.NEW OUT OF BOX WON'T RESET. STEP 1 LAMPS LOAD SIDE GOOD. RETIRED CONSTRUCTION ELECTRICIAN


I don't have answer for defective timer. Buy another timer if everything below checks out:
59018 7-day timer has limited 1 year warranty, and appears to be made by Tork
Timer is for 120Volt single-pole only.
Rated for 1000 watt tungsten, 8A ballast, 1/4 HP
Push reset button with toothpick > not necessary to press-and-hold other button to accomplish reset.
After reset, 12:00 am Monday should display.
Programs are deleted. Reprogram timer.

To check, change and delete specific programming, press PROG key until selected program displays, and then set new programming >>> or press-and-hold MODE button and press PROG button again to delete selected program.

Timer has non-replaceable 30-day carryover battery and does not lose programming after power outage, and will retain programs until battery is depleted.

Review wiring:
Hot to timer black.
Neutral to timer white.
Load to timer red.
Ground to timer green.

Lights will blink if timer red and timer white are connected to load together.
Timer will not function if timer black and red wires are reversed. Display will not show.

http://waterheatertimer.org/Woods-timers-and-manuals.html#59028

Aug 07, 2011 | Woods InWall 7 Day Digital Programmable...

1 Answer

In my mobile main display get blank and only white screen can appered


Hi,

This is a common problem with most of the Models with Samsung and Sony.This is due to the faulty firmware. You could try to reset the phone or pull out the battery for few minutes and then put it back. If the problem persists, you need to contact the service center to get the firmware re-flashed.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jun 13, 2010 | Samsung SGH-Z510 Cellular Phone

1 Answer

In layout all my lines becomes appers in white


Hi, go to options -> display -> colors -> on 2d model space -> uniforme backgroud -> choose the color black in the left

May 23, 2010 | Autodesk AutoCAD 2007

1 Answer

No display appering and the screen turns white


hardwar problim strip damg

chang flex wil bi ok

May 08, 2010 | Samsung SGH-J600 Cellular Phone

1 Answer

Blue sign in middle of computer that say user mode


men it sucks when my pc boots that users mode apperes in my screen ...it apperes again and again ~_~
it wont stop displaying in my monitor

how can i fix it ?

Dec 18, 2009 | LG Flatron L1715S 17" LCD Monitor

1 Answer

While i am using my system display settings suddenly appers on the desktop and contrast and brightness both are increasing as well as my pictures in internet are not showing with a clarity


sir first go to control panel next open display - you can show display properties - click settings - screen resolution set 1024 by 768 pixels the best resolution - pictures and internet showing clarily. ok if any problam 09177723823

Aug 28, 2009 | Microsoft Windows XP Home Edition

1 Answer

Monitor : no display and blue led light is blinking


The power supply is the first thing that the 110v electric line goes into. The invertor is the next item past the power supply, or sometimes contained within it. I do not thing monitors are a DIY repair.      First substitute a different monitor to confirm that it is, in deed , the monitor and not the video card.

Jan 14, 2009 | Advueu Technology ADV178T 17" Flat Panel...

1 Answer

PC or monitor, signal problems


your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose.

Mar 10, 2008 | Computers & Internet

1 Answer

Everytime I take pictures with my dscw70, the pictures will not show. A blurry screen shot with black and white lines... & whenever i start my camera a scrible ,blurry lines apper on the screen .when i...


o i see i had this prob , its condensation/liquid inside the camera , i suggest that you let it dry out , possibly with a hair dryer but DONT LEAVE IT TOO LONG the camera is sensitive so short period of hot air and letting it cool

Jul 13, 2007 | Sony Cyber-shot DSC-W70 Digital Camera

Not finding what you are looking for?
Canon PowerShot A410 Digital Camera Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

165 Answers

old marine
old marine

Level 3 Expert

1842 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...