Question about Lexmark X642e All-In-One Laser Printer

2 Answers

Lexmark x642e MPF Reset maintenance counter

Hi, i have a Lexmark x642e with error 80 (reset maintenance count). Can you tell me how can i reset this counter?. Thanx

Posted by on

  • Anonymous Apr 27, 2009

    I've purchased the maint kit. It came in and has been replaced by a fellow employee who didn't follow all the instructions particularly the part about reseting the maint alarm in the printer. He also was very tidy and tossed all that came with the maint kit to include instructions away. I'm looking for instructions on how to reset the maint message now that we've installed the kit.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi~
You can reset the maintenance count by going to the Configuration Menu.

Step 1: Turn off your X64x printer
Step 2: Hold the 2 and 6 buttons while the printer is off
Step 3: Turn on the printer but don't release the buttons yet. Keep holding those buttons for about 10 secs
Step 4: On your Operator Panel, you should see "Configuration Menu"
Step 5: Scroll down and look for "Reset Maint Count" and select it.
Step 6: Exit Config Menu and powercycle your printer (turn it off then back on)

Hope this is helpful... =)

<<ichtuscheeky>>

Posted on Sep 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 412 Answers

80 Scheduled Maintenance Message
The 80 Scheduled Maintenance error appears when you first power on the printer. The printer will still work even though it is in a maintenance condition. To clear the message temporarily and continue using the printer, simply press the Go button on the printer's screen. (For details on scheduled maintenance procedures, refer to the User's Guide for your printer.)  


This message appears when the printer maintenance counter determines that maintenance is due. For a list of the part numbers of maintenance kits for most of the printers that require them, click here. 

Note: The printer will still operate even if you do not have the kit replaced, but you may experience some print quality problems. 

You are required to purchase the maintenance kit and have it replaced even if the printer is still under warranty. Some maintenance kits can be installed without the assistance of a technician. However, some warranties cover on-site installation of the maintenance kit by a technician AFTER you have purchased the kit. For more information on the warranty terms for the maintenance kit, click here.


Source: Lexmark KnowledgeBase

Posted on Mar 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dell 3115cn printer will not connect to the network (it still works on USB cable), hard to believe it's broken, so can the printer system be reset?


Try turning off the printer and disconnecting power plug from wall. Hold power on button for about a minute. Then replug unit and turn power on - it should then attempt to hook up to your existing network.

If no go, try reinstalling the software that initially came with printer and was used to set up the network

Jan 10, 2017 | Dell Office Equipment & Supplies

1 Answer

I have a schumacher xp2260 and am getting an error code of r02 but cannot find any information about it. Please tell me what it means and how to fix it.


I have no information on this fault. I suggest you contact the manufacturer directly with the question, but really doubt it will be something you can fix yourself.

Jan 09, 2017 | Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

2 Answers

Toshiba estudio 455 Error Code E030


E030 indicates jam error on exit...U need to see where the paper stop and why...

Jul 28, 2015 | Toshiba Office Equipment & Supplies

1 Answer

I want to reset this thing


Sorry there is no "reset" for your printing calculator.

May 21, 2015 | Office Equipment & Supplies

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

I need a schematic for a Katsuda JMC4s Paper Cutter from Japan?


unnamed-04obcoisu5nwernczsqka0kl-4-0_0.jpg
Hi
I had JMC III KATSUDA (SH290HOP-N) paper cutter and memory shown ERROR 2. Memory did not work. Please let me know if you have any idea to fix it. My email is
leonardprint@gmail.com

Thank you

Dec 29, 2014 | Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

My DeVille 80 typewriter won't unlock and it's been like it for over 3 hours


Try to unplug for 30 min ,if still having problem go to mfg web site for instructions .

Feb 25, 2013 | Office Equipment & Supplies

1 Answer

Mfc-j630w error messagfe 4f


I don't know but I can't enter into maintenence mode I pressed just as its said but it's won't go and I really need my printer??

Jul 15, 2012 | Brother Multi-Function Center MFC-3360c...

Not finding what you are looking for?
Lexmark X642e All-In-One Laser Printer Logo

5,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...