Question about Spectroniq PDV-70X

2 Answers

I'm confused how to connect my DVD player with the TV. which cables connect where. I dont have a user manual.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The dvd player should be labeled on the back as video out and conversly the tv should have something similar on its jacks. If the tv has multiple rows of jacks they should be marked as to what source they are. To use the dvd player you may have to change the source input on the tv. 
As an example: I have my dvr hooked up to the comp 1 jacks and the dvd hooked up to component 2. when I want to use the dvd I hit the source button on the remote until it is at comp 2. If you power up the dvd first the dvd menu should show up when you change the source. If you have a multi remote then make sure you press tv before you change the source.

Posted on Jan 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 70 Answers

Mukhhe,

good day,to connect your DVD to TV screen follow this steps.

1) prepare your RCA cable ( 3 colored cable yellow/red/white)
note: always remember this

yellow = video
red and white = Audio (left and right)

2) at the back or front display of your TV screen you'll see RCA socket marked as "AV1 input" "AV2 input" etc... if your screen is only mono sound you can only see two sockets Yellow=video white= audio

3) at the back of your DVD player connect the RCA cable following the color code yellow to yellow white to white and red to red. after you connect the cable to your dvd player now connect the other end of thr RCA to your TV screen input.

make sure you'll connect it to "A/V input" not "A/V out" then after connecting all the cables, from the remote commander of your TV screen press a button indicating "A/V" some mark as "TV/AV" press this button until your screen display the back ground display of your DVD player.

cheers,
mark

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble connecting my insignia 32in.Tv To my DVD player


Yes you can use Just the red,white and yellow cable from your dvd player to the tv....now make sure you have it connected correctly...sometimes its easy to confused the yellow and white connections. make sure your tv is turned to Input that you have used for connecting the cables on the back....such as...input 1...select input 1 on your tv....or if it says dvd...then select dvdv on yoru tv..You can use a HDMI cable...just plug HDMI from your dvd player to your tv and select HDMI on yoru tv..Good luck

Mar 08, 2015 | Insignia IS-LCDTV32 32 in. Television

6 Answers

Connecting JVC HR-XVC27U VCR/DVD Combo to DIRECT TV


Here is a link to a line diagram to connect most tv/dvd/vcr/direct tv.

Apr 22, 2008 | JVC HR-XVC27U DVD Player/VCR

1 Answer

HW-e550 connection


If you have a newer tv with an optical audio output, that would be the easiest way to hook it up. Leave your current setup alone, and just hook an optical cable from the tv to the sub.

Apr 02, 2013 | Samsung HW-E550 Crystal Surround Air Track...

1 Answer

My TV is a Sharp-AQUOS Model # LC52D64U, I have 2 DVD players. SONY DVD player Model #DVP-S530D and MAGNAVOX VIDEO CASSETTE RECORDER/DVD PLAYER MODEL#MWD2206. Thanks Barbara


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC42_46_52D64U.pdf




SONY DVD PLAYER - MODEL # DVP-S530D:

http://www.docs.sony.com/reflib/docget.asp?manualid=8499&template_id=1&region_id=1&DL
=




MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:


http://download.m4c.magnavox.com/files/c/cmwd2206_f7/cmwd2206_f7_dfu_aen.pdf




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.


You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.




DIRECTV CONNECTION TO TV


Make sure your TV and DirecTV receiver are turned off before making any cable connections.
Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.
Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.
Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.
See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.


Here also is a link to a short video which demonstrates this basic HDMI connection procedure:

http://www.youtube.com/watch?v=J7P-yayRJ6c&NR=1




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.
In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.
At this point you should be getting an input signal from the DirecTV Receiver on your TV.
That completes the DIRECTV to TV connection portion of the system hook-up procedure.



SONY DVD PLAYER CONNECTION TO TV


Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.
Here is a link to a picture of an S-Video cable in case you need to see one:


http://amazingbestsellerstore.tk/wp-content/uploads/2011/08/31nOF2e5DXL.jpg





And here is a link to a picture of a set of 3 color RCA cables:


http://www.cameratron.co.za/images/productcables/cables/rca%20to%20rca.jpg




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.
See page 8 of the SONY DVD Player manual.
Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.
Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.
Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.
In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.
At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.
This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.


MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION

I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.
COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.
Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.
YELLOW cable plugs into the VIDEO OUT connector.
RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.
See page 7 of the MAGNAVOX manual, METHOD 1.
Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.
YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.
RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.

In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.
Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.
At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.
This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.
Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.

This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.


Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Oct 05, 2011 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV

1 Answer

What's your problem?NO MANUAL FOR 52" sHARP


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForH...




SONY DVD PLAYER - MODEL # DVP-S530D:



http://www.docs.sony.com/reflib/docget.a...





MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:



http://download.m4c.magnavox.com/files/c...




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.



You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.





DIRECTV CONNECTION TO TV



Make sure your TV and DirecTV receiver are turned off before making any cable connections.

Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.

Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.

Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.

See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.



Here also is a link to a short video which demonstrates this basic HDMI connection procedure:


http://www.youtube.com/watch?v=J7P-yayRJ...




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.

In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.

At this point you should be getting an input signal from the DirecTV Receiver on your TV.

That completes the DIRECTV to TV connection portion of the system hook-up procedure.




SONY DVD PLAYER CONNECTION TO TV



Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.

Here is a link to a picture of an S-Video cable in case you need to see one:



http://amazingbestsellerstore.tk/wp-cont...





And here is a link to a picture of a set of 3 color RCA cables:



http://www.cameratron.co.za/images/produ...




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.

See page 8 of the SONY DVD Player manual.

Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.

Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.

Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.

In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.

At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.

This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.



MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION



I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.

COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.

Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.

YELLOW cable plugs into the VIDEO OUT connector.

RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.

See page 7 of the MAGNAVOX manual, METHOD 1.

Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.

YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.

RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.


In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.

Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.

At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.

This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.

Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.


This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.



Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.


I hope that was helpful to you, good luck and take care.


Joe.

Oct 04, 2011 | Televison & Video

1 Answer

I own an iview 2600hd dvd player and im trying to hook it up to my sony trinitron tv...however, no matter how i switch my cables, the dvd player just won't show any picture or audio on my tv...and when...


Try new cables. RCA cables have a tendency to have bad connections internally. Also, triple check that you're on the right input and the wires are properly connected to the DVD player. If all that fails, try the DVD player on a different T.V. and something that uses RCA cables on your T.V, such as a cable box to make sure the input jacks on the T.V. aren't bad, and the DVD player isn't bad.
Through out all of this troubleshooting, you should manage to get the DVD player hooked up.

Jun 20, 2011 | Televison & Video

1 Answer

I need help connecting sony dvp ns 300 to a jvc tv. I can't watch dvd at all, confused about the wiring where does it go?


The CD/DVD player has three output ports:
(i) Line out Video used to connect the yellow pin of composite cable.
(ii) S-video out use d to connect an S-video cable.
(iii) Component video out (red, blue, green) used to connect a component video cable.

So, in order to connect the CD/DVD player to the TV, the TV should have either of the corresponding input port on it.

However, the video quality transmitted by component video cable will be the best among the three.

So, you may connect the TV and the CD/DVD player using an appropriate cable.

All the above connections require an additional audio cable to transmit audio from the CD/DVD player to the TV.
In this case, you may use an RCA (red and white) audio cable to connect the "R and L" audio out port on the CD/DVD player to the corresponding "R and L" audio in port on the TV.

Performing all the above steps will help you get the DVD player work with the TV.



wish u good luck!!!!!!!!!!

Sep 17, 2009 | Sony DVP-NS300 DVD Player

1 Answer

Hook up Memorex MVD4544 DVD/VCR combo


ok on the back of the dvd player look for the yellow red and white plugs you should have gotten a cable with yellow white and red plugs match the colors from the dvd player to the colors on the back of the tv labeled VIDEO 1 then plug the power in and tune the tv to video 1

Mar 27, 2009 | Televison & Video

2 Answers

Trying to connect dvd player


You will have to connect your DVD player to the plasma TV, not the cable box. The cable box (or most cable boxes) have video outputs only. The same is true for the DVD player: it outputs the video to the tv.

Look in your DVD manual for scenarios for connecting your player to the tv.

Mike

Dec 06, 2007 | Panasonic DVD-S27 DVD Player

Not finding what you are looking for?
Spectroniq PDV-70X Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Spectroniq Televison & Video Experts

The Knight
The Knight

Level 3 Expert

70972 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Spectroniq Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...