Question about Linksys Wireless-G WRT54G Router

1 Answer

I have switched internet to at&t dsl and now when i hook up wireless router i cannot connect to the internet can connect with only modem connected but not with both wirelss router and modem connected

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Hi there,
when you go through a router with dsl, your router stores your sign on and password. since you have a new providor, you need to get on your router's settings page through your browser, and change your settings to what at&t gave you. what did you have before-- cable internet? dial up? cable does not require an ID + password at all, your router will just pick it up. DSL requires that you tell the router what your sign on is... to get to your linksys login page, open your browswer and go to

http://192.168.1.1/

you have to 1st sign on to control your router-- usually it's username "admin" and no passwork... I hope you remember it!

second, the main screen, you need to punch in your AT&T info-- username and password. I assume it's PPPOE (PPP over ethernet)

hit save, and after it confirms, reboot your router (unplug for a minute) and your computer.

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant hook up my d link 150 up to my toshiba sattelite laptop. i have dsl modem and i dont wanna mess it up.


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Apr 09, 2011 | D-Link Wireless N 150 Home Router 4Port...

1 Answer

D-Link DSL-2640-T. After power outage, I have a good wireless connection BUT no internet access. LAN line does not work either. Please suggest possible solutions.


chack your DSL settings may your not conacted with your sevice provider

chack your locale settings in modem try folowing setups

1. If you have a modem, connect the modem to the router(make sure modem should be connected to the port on which LAN, Internet, WAN is mentioned. It would be a separate one port on the router) and router to the computer.
2. Insert the disk that came with the router, inside the computer.
3. Follow the on screen instructions.
4.No, connect to the wireless

Apr 22, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

Just connected router to clear network modem and VoIP (wireless phone service), now when the phone ring, it disconnects me from the internet and the connection is lost until the phone call is complete.


Is your modem a DSL or cable modem?
If it is a DSL modem do you have a DSL filter on each phone line to the phones in your house?
The DSL modem does not need a DSL filter on the phone line.

Nov 09, 2009 | NetGear WGR614 Wireless Router

1 Answer

2wire att dsl modem/router on vista


Connect your DSL to wireless router and enable automatic ip on wireless. check whether DHCP is enable in DSL router or not.

Apr 24, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Bright house modem and desktop computer, trying to hook up wireless net gear router for 2nd desktop to get internet? How do I configure the cables?


Connect the lan cable from the dsl modem into the first port on your netgear router ..
make sure your dsl modem is on PPPoE mode so that it autoconnects..
Now just connect to your wireless router via your pc interface..
*Do add a network key to your wireless network to avoid unwanted access

Jan 19, 2009 | NetGear WGR614 Wireless Router

1 Answer

My DSL was installed. I am trying to hook up my linksys wireless router, when I do the internet does not work. What am I doing wrong?


modem type ? make sure it is on modem-only mode if it is a home-gateway type.

connect modem ethernet to router internet port (located next to the power port).

press & hold for 10 secs. the routers reset switch (until all lights blink).

launch the internet connection wizard & select "computer is connected to a gateway / internet connection is always ON"

Jan 14, 2009 | Linksys Wireless-G Broadband Router

2 Answers

Can't get a wireless router to work with a speedstream 4200


This may actually be an issue with your ISP. There is a good possiblity that your ISP has bound your connection to the MAC address of the network card on your computer. This is a common occurance which is why router manufacturers give you the option of having your router clone your computer's MAC address. Go into your router's management an perform the clone, sorry I cannot give you more details but I don't know the specific model of your Belkin router.

Jan 05, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

After successful instn of my linksys wireless router i cannot access to wireless online connection


Whenever you connect a different device to the cable/DSL modem the modem itself must be reset. Dont even waste a phone call to linksys. Its useless.

If you are using DSL depending on your ISP you may have to enter your account info into the router's PPoE section

Cable users should have the router set to "Obtain IP aadress automatically"

Use the reset button on the back of the router and start from scratch.
Unplug the cable/DSL modem power
Hook up your router WAN/Internet to the Cable/DSL modem Ethernet/LAN jack
Power on the Cable/DSL Modem first, wait about a minute, then power on the router.

Sep 25, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys router


unplug your DSL modem. Wait 30 seconds and plug it back in.

Make sure the router is connected to a DSL modem. Lately I have seen DSL modems connected to offices that are really routers. If thats the case it may not be talking because the DSL is address the gateway with the same address as the router.

The best way to test this is to see what happens when you disconnect your linksys router and type in http://192.168.0.1
in internet explorer.

If the DSL modem screen appears, it's configured as a router.

Then you will have to take the linksys router and turn it into a switch with a wireless access point. I

Jul 14, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...