I need codes and instructions for a symphonic Tv

Hello
Setup code for Symphonic TV/VCR with Jumbo remote control is: [002].
There is no setup codes for TV/VCR combo with RCA RCU600M remote control. OK.

Here is the code for your symphonic tv that works for me. It is "0053."


Here are the steps:
1.

Press the "On" button on the symphonic TV to turn that set on.

2.

Hold down the TV button on the symphonic remote until all of the buttons on that remote flash.

3.

Type in 0053 code for the symphonic TV remote as you point the remote toward the TV.

4.

Press either the "Power" or "Pound" ("#") button on the symphonic remote to save the code

These are the steps on how to program your RCA Universal Remote Control to your Symphonic TV.

1. Press and "HOLD" CODE SEARCH.
2. Press and release the TV button. When the TV button flashes proceed to the next step.
3. Enter the three digit code. In your case, the code for the Symphonic TV are 064 or 076.
   
4. Release CODE SEARCH.
5. With the TV on, press another button, for example CHANNEL UP. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-5 using the other code number.

http://insigniaproducts.com/cms/documents/NS-DXA1-APT%20UM%20EN.pdf
Here are the Symphonic TV codes. These are for a universal remote OK
SYMPHONIC
520 904 906
Hope this helps. As for the insignia, if you can not click the link copy and paste. What you need is on page 18, instruction on how to program your converter. Download if you lost it and print if needed. You will need Acrobat to view this. Good luck

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

Download the manual and look at the back pages =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

Codes for Symphonic TV on Page 39

Symphonic TV 1026, 1033, 1038, 1046, 1155, 1189

Codes for Symphonic TV on Page 40

Symphonic VCR 2026

Good Luck!!

I have a Symphonic also and I was able to program it to watch TV using the dfirections on teh inside of the battery door. Try it! I can't get VCR to work though.

i need the code for my one for all remote control for my tv tha is a symphonic

need codes for phillips-magnavox remote with a symphonic t.v

I HAVE A TRISONIC TS-RC488 AND LOST THE PAPER THAT WAS INSIDE THE REMOTE , THE INSTRUCTIONS CAN ANYONE TELL ME THE CODE FOR A SONY TV AND THE INSTRUCTIONS OF HOW TO SET UP THE UNIVERSAL TRISONIC ,,,, THANKS ,,,,, SINCERELY JOHN