Question about NorStar Meridian M7310 Phone

1 Answer

No dial tone on receiver only on voice

Hello,

I have the M7310 phone system and I can not get a dial tone on the receiver the dial tone is only on voice there ois no speaker phone or if there is I have no idea how to work it and when I do pick up the phone it doesn't automatically pick a line!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Make shure handset cord is Not pluged in to the Headset jack on the bottom, needs to be in the handset jack (look at the icons)

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dial tone


Try swapping it with another working phone of the same type. This will tell you if the extension line is in trouble to the phone system or the phone.

Jan 02, 2013 | NorStar M7310 Corded Phone

1 Answer

M7310 Non-Stop Dial Tone


Intercom button/s provide dial tone when they are pressed. They are required to call other phones on your system.
Sounds like your button is stuck or issue with the motherboard.

Dec 17, 2012 | NorStar Meridian M7310 Phone

1 Answer

I have 2 problems. 1. The orange message light will not stop flashing no matter what I do. 2. Some how the system was switched from touch tone to dial tone. I can't seem to that switched either.


Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes. In the event your message waiting light gets out of sync with your phone company's
voice messaging system, you can manually reset it back to the "No messages waiting" state.
1. Press and hold FiND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
2. A beep sounds and the message alert tone is reset.
Changing the dial mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone's settings:
1. Press MENU/SELECT.
2. Select the Global Setup menu, and then the Dial Mode submenu.
3. Scroll to highlight Pulse.
4. Press MENU/SELECT. You will hear a confirmation tone.
If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select Tone in step 3.

Finally for future ease of use, here is a link to the user manual were I copied the above information from:

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1580-3om.pdf

Jul 21, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How do I activate the handsfree mute button on Norstar M7310? When I push outside line, then handsfree, I get dial tone, but cannot dial outside number. When call is incoming, after answering, I cannot...


familirize with devices user manual whether has feature functions requested. Second, ascertain that device was least malfunctioning since acquired. normally, familirising with innovative devices makes expertise in functionality.

Jul 20, 2011 | NorStar Meridian M7310 Phone

1 Answer

We have the Norstar Meridian (M7310)telephone system in our non-profit organization. Recently there was a change in our service providers and since that time we have had nothing but problems with our...


Could be two things, there could be a general delivery mailbox attached to the system which is mail box 100, or the new service provider has a off premisis voicemail attached to the lines. if there is VM on the lines you should get a stuttered dial tone on the line indicating that you have a voice mail.

Oct 13, 2009 | NorStar M7310 Corded Phone

2 Answers

Norstar M7310- buttons don't produce tone anymore


Its the problem from the system.

Go to the programming of Norstar by Feature **266344 and the password is 266344.
Go to line datd or line and make dialling made as Tone.
It will fix ur problem.


















Apr 21, 2009 | NorStar M7310 Corded Phone

2 Answers

Norstar m7310 phone


Rushy: I assume you have a KSU which controls the entire system. The KSU is cabled to each line number provided by your local phone company. Once you have this line established it now makes contact with your phone set via dedicated cabling to each telephone set.. With all this hardware in place you can now program the line keys on each set for either one touch dialing or line access for your dial tone. Program guides can be aquired through GOOGLE by entering " Norstar m7310 program guide".Thank You. Jerry

Feb 08, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

623 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Phones Experts

kakima

Level 3 Expert

96396 Answers

dan4261

Level 1 Expert

14 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a NorStar Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...