Question about Altec Lansing VS3251 Speaker

1 Answer

My philips dvd player 5.1 have female ports at back side for audio but i have the sound system of LG which has simple naked wire to connect .

What to do .some told to add amplifier between them some told decoder is needed. My home theater is 5.1 altec lansing VS3251 & dvd player is philips DVP3256/94
i am canect true cable but only two speaker is working

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Philips DVP 3256 has 6 outputs which takes in RCA connectors
Altec lansing VS3251 has 3 STEREO outputs.
Buy 3 nos of STEREO (female) to RCA (male) cables
1. Connect the Altec's green wire to first stereo-to-RCA cable. RCA ends to DVP 3256's Front left and Front right
2. Connect the Altec's black wire to second stereo-to-RCA cable. RCA ends to DVP 3256's Rear left and Rear right
3. Connect the Altec's orange wire to third stereo-to-RCA cable. RCA ends to DVP 3256's Centre/Sub woofer. Interchange RCA ends if the Subwoofer sounds dull.

Good Luck

Posted on Jun 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The remote of my Altec Lansing vs3251 doesn't work anymore? Why? How can i fix it? :(


Did you get a solution of this problem? I am also facing the problem.

Aug 11, 2011 | Altec Lansing VS3251 Speaker

1 Answer

Can I connect this to my tv? If so how-can't figure out how.


Sure, if your TV has some kind of audio outputs (and volume controls) for the "audio 5.1 inputs" you see in this picture.

http://rosario-cavite.olx.com.ph/altec-lansing-vs3251-5-1-speaker-rush-3-8k-19-days-old-iid-24919817#pics

You COULD adapt the probably-present stereo audio from your TV for use with the front channels . Stereo.

May 12, 2011 | Altec Lansing VS3251 Speaker

1 Answer

How to connect 5.1 home theatre to sony bravia lcd tv


how to connect philips home theatre dsp 2500 to sony bravia

Jun 07, 2010 | Altec Lansing VS3251 Speaker

1 Answer

Altec Lansing VS3251 rear left channel not working


Sounds like you "blew" the left channel. Make sure your connections are good, and all positives and negatives hooked up the way they are meant to be. If it still does not work, take it to be repaired. Call around first, with the AND serial number. Get repair estimates, ask about the "bench charge"

Apr 11, 2010 | Altec Lansing VS3251 Speaker

1 Answer

I have connected my philips 5.1 channel dvd player properly with Altec Lancing VS3251 speaker 5.1.There is audio output from the front speakers but there is no audio output from the rear left/right and...


to get 5.1 you need to have an optical/co-axal/hdmi input in to the speakers to get 5.1 and then the dvd player must have one of them as an out put

hope that helped

Jun 18, 2009 | Altec Lansing VS3251 Speaker

1 Answer

Can the Altec Lansing VS3251 5.1 work with a Xbox?


Because this system is made to work with the PCs, it has a 3.5 mm stereo input. The 360 has rca cable outputs. Fortunately, the signal is the same and all you need is a 3.5 mm to rca y adapter that you can find at radioshack or any local electronics store.

Apr 14, 2009 | Altec Lansing VS3251 Speaker

1 Answer

I am not sure how to connect altec lansing vs3251 5.1 with my tv


U can connect it by a Y connector. Its a 3.5mm stereo jack on one end and the other end splits into two RCA sockts. So u can use these RCA sockets to connect to feed the audio output from the TV. thats all.

Apr 10, 2009 | Audiovox Audio Players & Recorders

Not finding what you are looking for?
Altec Lansing VS3251 Speaker Logo

746 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...