Question about Zanussi FJS1225W Front Load Washer

1 Answer

Zanussi washing machine zwf1437w error code e30

Can anbody help me with my tempramental washing machine ?
When machine is switched on flashing error code E30 !
What does this mean ? Will carry out a full wash when it feels like it,but refuses to operate sometimes and has been like this for a few weeks! however the problem is getting worse and have battled with it all day !
If anyone can offer any advice it would be gratefully appreciated.
thankyou !!

Posted by on

  • 1 more comment 
  • m_allman1 Jan 30, 2009

    have checked filter at front and apeears to be no obdtruction .

    any suggestion what to check next ?

    thankyou for your advice.

  • Anonymous Apr 25, 2009

    I have the same problem and wondered if you got an answer to yours

  • m_allman1 Apr 26, 2009

    filter is clear !!

    still having the e30 error code , more frequent !

    any further advice would be appreciated !!

    thankyou !

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

E30 indicates a pressure system fault. There can be several causes but the most frequent is a blockage in the system.
First thing to do is check the filter on front of machine.
Please do this and report your findings.

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Zanussi zfw 1631 w skipping through programmes straight onto drain from wash. has been coming up with an error code e30


I'm going to take a stab at the filter on the empty pump being blocked.

I have tried to find an error code that matches for you and loads of forums talk about a possible blocked pump filter (Though I have seen a motor fault mentioned too!).

Try checking the filter out, it's the biggest cause of questions being posted on this site for washing machines

Jun 29, 2011 | Zanussi Washing Machines

1 Answer

Re: Zanussi ZWF1437W After setting programme on machine and after about 30 secs programme is cancelled all lights go out and zero in display and beeps. I have cleaned out filter at bottom of machine twice...


Sounds like you have a heater element problem. If the element is at the back then you should be able to access it by removing the back plate and unscrewing the middle nut and pulling it out, may need to pry it out as it can be tight and fit the element. If there is no back plate then you will need to remove the entire back panel, do this by first removing the lid, then remove the 2 screws at the bottom middle and 2 at the top that hold the back panel, and then it should slide out. Hope this helps.

Mar 04, 2011 | Washing Machines

1 Answer

Machine stopping mid cycle


Hello,
Count the number of green flashes(1st number of error code). count number of red flashes(2nd number of error code).
Common codes are:
E10 or 11 water pressure faults.
E20 filter/pump faults.
E30 pressure switch/heater faults.
E40 door switch faults.
E50 motor faults.
E60 Heater faults.
These are some of the error codes but there are many variations on some codes depending on the model.Hpoe this has been some help.

Apr 24, 2010 | Zanussi ZWF10070W Front Load Washer

3 Answers

Zanussi zwf1631w jetwash front loading washing m/c


had to call an enginer out, the problem was down to a faulty motor rota, to identify if e30 is this fault, rotate the drum (so the motor rotates) and try to start the m/c. if it runs ok you know to change the rota. hope this may help someone

Sep 12, 2008 | Zanussi ZWF1440 Front Load Washer

1 Answer

ZANUSSI ZWF1437W WASHING MACHINE


yes sounds like door interlock cheap and easy diy job goodluck and unplug regards jason

Jun 14, 2008 | Zanussi ZWF1430W Front Load Washer

3 Answers

Model ZWF1437W


Try holding 'end of cycle' signal till the error light goes off.

Apr 29, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi ZWF1437W washing machine - wont start


The error message "Err" usually indicates that the wash program and option are not compatible. 40 degrees and 900 rpm Spin should be o.k.. I would try another wash program with no special options and see if the problem goes away.

Jan 24, 2008 | Zanussi ZWF1430W Front Load Washer

2 Answers

Error code e30


This error relates to the motor drive. Plug off the wall, open up behind, look for broken belt. If the belt is good its the motor brushes. Secure connections to the motor, look for loose wires.....
& pl rate if helped...............

Dec 04, 2007 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Zanussi FJS1225W Front Load Washer Logo

1,868 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...