- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Charge your Philips GoGear ViBE for at least three hours before turning it on.
Insert the small end of your
mini USB cable into your GoGear ViBE. Insert the other end of this cable
into one of your computer's USB ports. Turn your GoGear ViBE on by
pressing and holding the "Power" button for two seconds.
Insert the Philips GoGear ViBE software disc into your computer's CD-ROM drive. Follow the onscreen prompts to install it.
Open "Computer" from the "Start"
menu and locate the GoViBE icon to make sure it has been successfully
connected to your computer.
Navigate to your music files. If
you're unsure about their location, start by looking in the "Music"
folder under the "Start" menu.
Drag and drop your music files from their folder onto the GoViBE icon in your "Computer" window.
Right-click the USB icon with
the green arrow, located in your taskbar, to disconnect your device.
Click "Safely Remove hardware," then wait until your computer confirms
that it's safe to remove the device. Disconnect the USB cable from both
your computer and your GoGear ViBE.
Select the musical note icon
from the main menu of your GoGear ViBE to open your music files.
Navigate to the sub-folders section, and select a song from either the
artist, album, track list or genre. Press the "Play/Pause" button to
begin playing a song
OK you need to use a Horizontal mounted DVD, Perhaps from a friend, the min-DVD WILL fit into middle ring of normal CD/DVD, use that and copy to USB drive, then take USB drive to PC that cannot use CD, and use from USB drive. Problem Solved.
You do this via your computer. Plug the USB connector into GoGear, and into your USB port on your computer. You open the "Virtual Disc" that has been creaated when you installed the CD, (See disc drives in 'My computer')
Hope this helps
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=GB&slg=ENG&cat=MP3_PLAYERS_CA&sct=HDD_AUDIO_JUKEBOX_SU&session=20080621082708_22.214.171.124&grp=PORTABLE_ENTERTAINMENT_GR&ctn=HDD065/05&mid=Link_Software&hlt=Link_Software this link fixwd the same problem for me after i lost my disc