Question about Bulldog Remote Starter & T-Harness Kit for 95-03 Chevy Blazer/Chevy S-10 Pi

1 Answer

T-harness does not fit remote start unit

I purchased a T-harness from DirectWholesale.net for a 96 Camry (TOY3) and the ends do not fit into the remote starter unit. Has anyone had this problem or know what to do?

Posted by on

  • avisingh1 Mar 20, 2009

    2002 camry remote :

    I dropped my remote on hard floor. Know the remote is not working . I can't open OR close door with remote.

    What should I do??

    please give suggestion......Thanks

    Avi

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 344 Answers

If the ends don't fit in to your remote start unit you will have to cut them and splice into them, or if you mail me both harnesses I will do it for you for free, you would have to pay for me to ship it back to you of course but I think you could do it your self or if you know someone who knows how to solder

Posted on Jan 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm keeps turning on when I turn on my car starter


Okay, the Avital 4111 is a one button remote starter. So, it has no way of locking your car doors except if wired to lock after start or, after shut down. In the 2010 CRV, the unit should have been wired to disarm the alarm before start(brown wire in kick panel) and to unlock doors when running (grey wire in kick panel in same harness as disarm) with the press and release of the remote starter remote. If the unit is not working in cold weather it may be due to the installer using a valet key instead of a bypass and/or the unit may be programmed for virtual tachometer or voltage instead of having a true tachometer wire connected.

Jan 25, 2013 | Avital Vehicle Parts & Accessories

1 Answer

I have a prestige remote Audio box starter remote alarm on a 2002 Toyota Camry.I unplugged the sensor and the car still doesn't start.can you help me i am out of the state need to get home.


Locate the valet switch( black push button), turn ignition on, press and release valet switch. the valet switch is plugged onto the main control unit. You can find the main control unit by tracing the harness that you unplugged from the shock sensor. The valet switch is plugged into a two pin plug and has a blue end. Trace the wire to the valet switch.

Jul 10, 2011 | Prestige Remote Start

1 Answer

I bought a used car toyota camry 2005 and it has avital key less remote system installed. model is 474L. It has remote start working and drive door open/close However, i am not able to open the power...


The Camry you purchased may not be equipped with a power trunk. Press and hold the trunk button for appoximately 4 seconds. The trunk should release if the wire is connected and, you have a power trunk.
The Camry (and other toyotas) require a double pulse on the unlock wire. If the double pulse is not programmed the aftermarket unit will mimic the factory keyless entry. One press of the unlock button opens the drivers door. Immediately press the unlock button again to unlock the other doors.

May 05, 2011 | 474L TX 4-Button Replacement TX Remote

1 Answer

Remote starts car but does not turn interior heater on, have a pt cruiser 2001 purchased in montreal quebec, installed by dealer


The black/orange wire in the ignition harness is most likely not connected to the remote start unit. Depending on the remote start model that you have, relays may or may not be required to install this function.

Nov 18, 2010 | Remote Start System

1 Answer

Need new remotes


universal remotes for the bulldog brand are available at any walmart, if not you can go to www.directwholesale.net

Jan 25, 2010 | Remote Starter with Keyless Entry

1 Answer

Is there a T-harness that will fit an 01 Buick LeSabre? I need 1 to simplify a Bulldog Remote starter kit. Joe


There sure is, It uses the gm2 harness for the LeSabre and you also might need a 791 anti theft bypass for the security transponder if equiped on your vehicle. Check out the bulldog website or call the support line # that came with your unit to order the T-harness.

Jan 11, 2010 | Remote Starter with Keyless Entry

Not finding what you are looking for?
Bulldog Remote Starter & T-Harness Kit for 95-03 Chevy Blazer/Chevy S-10 Pi Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bulldog Security Vehicle Parts & Accessories Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

John
John

Level 2 Expert

473 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Bulldog Security Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...