Question about Dishwashers

1 Answer

Dishwasher slowly fills with water

My Whirlpool Gold, Quiet Partner III dishwasher (Model: GU1100XTS1) slowly fill with water after a wash cycle is complete. If I press the ''Cancel'' button, the water will all drain out.

I would like to try and fix this on my own rather than having a service person come out. I suspect that there is a fill valve of sorts that is not closing completely. How can I verify this for sure? And, once I've isolated the problem where can find the part numbers, purchase the parts, and I find a service manual to help me with the assembly?

Thank you for any assistance!
Greg

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 360 Answers

Greg, at this link you can download available manuals for your unit.

http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=GU1100&siteCd=WHRCOM

Good luck with your repair.

Please take the time to rate this solution.


Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 6 year old Whirlpool dishwasher is loud


This is a bad wash pump. Looking at about $175 for just the sump assembly. You could do it yourself, but unit would need to be uninstalled.

May 28, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Our quiet partner iii dishwasher is not working. It is not gettting dishes cleaned soap left on dishes


Our whirlpool gold quiet partner iii dishwasher is not working well . It is not gettting dishes cleaned soap left on dishes on top primarily

May 16, 2010 | Dishwashers

1 Answer

We have the Whirlpool Gold quiet partner III dishwasher and lately have noticed residue on the dishes after the cleaning cycle is complete. Where is the trap to clean?


Make sure your water is hot, at least 120deg f. Also, use least amount of soap you can get away with. Usually around 2 tablespoons for soft water. Use powdered soap not gel. Gel leaves a tiny residue each load and will clog up plumbing in dw after 4,5,or 6 years. Rinse agent such as Jet Dry is highly recommended.

Try the "Tang" trick. Orange Tang drink mix is mildly acidic. With an empty dishwasher, start and fill, then normal drain. On second fill, add a full jar of Tang then let the dishwasher run for a few minutes. Crack the door to stop the dishwasher and let it sit for several hours or overnight. Then close the door, push start and let the dw run through the remaining cycle. This will sometimes clean out the crud in the water lines.

Hope this helps! Ken

Jan 06, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Dishwasher is not getting dishes clean. Water is


follow this link:
http://www.fixya.com/support/t2390397-dishwasher_acts_up

that guy gave me some good advice!

Jun 09, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Won't full cycle.


Ok. Mine has started working again somewhat. I ran a rinse cycle and the pump motor started working again. I then drained it, and started a regular cycle and it's working again for now. The motor still does not sound right though.

Mar 21, 2009 | Whirlpool GU1100XTLB / GU1100XTLQ /...

1 Answer

Quiet partner III taking over 4 hrs to complete normal wash cycle


ok check how fast the water is draining,,might be a bit slow...onthejob

Jan 20, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Quiet Partner II not washing or sensing.


I have a whirlpool quiet partner II and for some reason it does not drain the water out any more and I cannot figure out why....people say that it is the filter but that is unbelievably hard to get to and I cannot find any instructions online or paper work that tells how to break it down. If anyone has any insight please let me know

Nov 16, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

13732 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...