Question about Welch Allyn Spot Vital Signs Monitor with NIBP and Stand

1 Answer

Temperature I have a spot vital sign monitor and it has somehow changed the temperature reading to celcius. I need to change it back to farenheit. Can you help me?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you press the power button and the blood pressure button simultaneously, the monitor goes into programming mode. You hit the mode button until you reach the temperature and select the F or C by pressing the blood pressure button. To get out of programming you press the power button to power down and then power back up to use.

Posted on Jan 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change my luxpro psd111 thermostat to display temperature back to farenheit from Celsius?


On the Luxpro PSD111, Farenheit or Celcius are selected using the Jumper Switch J2 on the rear of the unit's circuit board:
Open = Celcius
Closed = Farenheit

Jan 20, 2014 | Cars & Trucks

1 Answer

How do I switch Equity 44200 from Celius to Farenheit?


Hold the Alarm 2 button down to change from Celsius to Fahrenheit.

Jan 19, 2012 | Equity Time USA Insta-Set 44200 Clock...

1 Answer

Ultronic clock, humidity & temperature. How does one read the "Temperature Trend" scal on the lower left of the screen. There are three scales shown and the indicators on the scale keeps...


This clock keeps track of the temperatures for each of the last 12 hours. So on the bottom, you'll see the temp at 12 hours ago (-12), 6 hours ago (-6), etc. On the left side, you'll see the temperature in Farenheit go from +5.4 to -5.4 from where it is currently. So if the temperature is 70F degrees right now, and it was 65F degrees 12 hours ago, then it'll show -5 in the first -12 column. It will always be at 0 for the current hour on the right. The scale on the right is in Celcius so it does the exact same thing as Farenheit.

Mar 01, 2011 | Watches

1 Answer

How do I change my A/C temperature from Farenheit to Celcius on my Panasonic remote control?


try to inspect your remote it has a button of adjusting farenheit to celcius or try to see your users manual.

Feb 23, 2011 | Heating & Cooling

1 Answer

I have a BESTMED, LLC. Golden, co 80401 KI-8160/INFRARED EAR THERMOMETER its supposed to switch somhow from celcius to farenheit and vise versa well my instructions are long gone and my daughter switched...


For BESTMED KI-8160: The C and F mode can be switched by turning the unit on then pressing the START/STOP again immediately and holding it down. The display will show "CH" with "F" or "C". Release the button when the mode you desire is in the display window. The unit will show "L" with the degree sign and the smiling face symbol in the display and is ready to take a new temperature reading.

Feb 17, 2011 | Health & Beauty

1 Answer

Wash temperature scale


TEMPERATURE - CELSIUS OR FARENHEIT
If you want to change the temperature indication from Celsius (C) to Farenheit (F), proceed as follows:
Turn the main switch, off and turn it on again. Press the Enter button five times, then press the P2 button five times. These ten times must be completed within fifteen seconds. Within three seconds after pressing P2 the last time, use the < > buttons to select temperature indication.

Sep 22, 2008 | Asko W640

Not finding what you are looking for?
Welch Allyn Spot Vital Signs Monitor with NIBP and Stand Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Welch Allyn Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Brad Brown

Level 3 Expert

16174 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you a Welch Allyn Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...