Question about HP OfficeJet 6110 All-In-One InkJet Printer

2 Answers

Printerr taking time to warm up and now show new hardware found any help

My printer was working very well till a month ago it started not to print just keep warming up. I changed the PC as I thought the hard drive of my Computer was almost full and this was the problem that made it to take time to send info to the printer but it never solve the problem. I now have a new PC but the printer is still doing the same thing. When I turn it on it will normal initialized but when I try to print any document, scanning a text or pictures it will just keep on warming up. And sometimes when I turn it on I see a new hardware found which is HP office jet flash. I have down load the new driver from HP site but I still it doesn?t fine the right driver for that new hardware. Can anyone tell me what this is and where to find the driver? Or is anyone know the solution for my printer why it takes so much time to warm up and never print or scan at all? Any help would be very appreciated

Posted by on

2 Answers

Re: Printerr taking time to warm up and now show new hardware found any help - HP OfficeJet 6110 All-In-One InkJet Printer...

Printer is Warming up what is problem

Posted on May 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
Re: Printerr taking time to warm up and now show new...

Please review the link provided and follow the steps suggested to solve this known issue: You may also want to review this link as it contains instructions to update the firmware which resolve your "warming up" error message. Please let me know if either of these references fixes your issue. If they don't I would be happy to continue assisting you. Thanks...

Posted on Jul 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Lexmark S405 : printer will not print until the black ink cartridge is replaced

Smash printer with axe or sledgehammer. Grin maniacally. After researching on internet,go out & buy new printer that allows you to print till empty & refill again! Obviously not a Lexmark...

Jul 21, 2012 | Lexmark Interpret S405 Wireless All-in-One...

1 Answer

Grrr...! Okay, I had the 1400 for 2 years, loved

If you've only bought it 2 months ago it will still be under warranty.

Apr 22, 2010 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

Hello, I bought a printer a few months ago but it doesn't seem to work. I've installed the proper drivers but every time I try printing sth a got a message ''Service error 5100, cancel printing and then...


I could make several suggestion to "fix" the problem, such as clean the timing strip, etc., but since your printer is still under warranty, I'd suggest contacting Canon for a repair / replacement due to a potential hardware problem. You shouldn't be getting a "Service error 5100" after a few months.

Hope this helps.

Nov 24, 2009 | Canon Pixma iP4500 InkJet Printer

2 Answers

MP830 PGBK does not print, tried new cartridges and usual cleaning etc, nothing. Bought new print head but still does not print. Other colours Bk,Y,M,C all ok. Have tried 'Auto Alignment' but this fails...

the printhead probably needs to be taken out of printer and cleaned.

just pop the ink cartridges out, then remove the print-head, fill a sink full of warm water, and swirl the print head around in the warm water. Blow through the color slits on the print head into the sink full of water it will get messy. empty the sink full of colored warm water.
rinse and repeat till your are satisfied its clean. dry it off with a cloth towel you don't care for, because it will get messy and covered in ink.
put your printer back together and it should may take a few times...but i got my printer 'PGBK ink cartridge' working again doing this. or you can spend 100 bucks and buy a new printer is a mp830 it came apart easily no tools or force needed... good luck and don't break your printer...its easy.

Nov 01, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Horizontal lines

1.5" comes to about 38 mm, the closest thing I found to that mark is the T2 roller needs replacing.

Apr 20, 2009 | Samsung CLP-500 Laser Printer

1 Answer

Will not print

dirver conflict, completely remove from OS, take off network and see if HP works independently well. reset on network and share again.

Jun 22, 2008 | HP Photosmart C7280 Printer

2 Answers

Printer acts like it's working then produces a blank page

Try to print first a self test page on the printer. Does it print a blank page also ? Do you have good or new ink cartridges in the printer ? Let me know.

Jul 31, 2007 | Dell A920 InkJet Printer

3 Answers

Cyan cartridge

My IP4200 started doing this about a week ago it tells me I have two Cyan cartridges. I don't, cartridges are canon cartridges and were changed four months ago worked fine until now. Pressing the middle button the resume button is working eventually, so far, but I don't know for how long. Seems like a hardware problem as I deleted and reinstalled the software no difference and everything worked fine for the first four months.

Jan 11, 2007 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94113 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides