I have above, comes up with this message, usually works/set on free credit. now comes up with this. wont let you set free credit or if you try to select a track credit flashes. was working perfect until switched on today. Can someone help or does anyine know a repair service in the peterborough/lincs area.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had a problem similar problem with a dav LF1. I undid a couple of screws, poped the top of the CD/DVD drive so I could them pull the disk out by hand. I then prised the slot open a bit more with my fingers and the plastic eject arm poped up, it seems it was stuck. Works fine now.
Make sure that the disc you are using are region 1. To check the disc region, look on the spine of the dvd. It should say NTSC region one. You can also download software to change the firmwar of the player to region free. Or your player may already have the capability built in. Go into your menu and check for region settings. If it has them, it should be set to "one" Se it to all regions and it will play any region disc.
Not sure which trick worked, but i did ur classic 7,3,4,4,6,6,0 trick, got no message from the player. So i did pressed 0000 after that. Still no message appeared. But when i pressed start....it worked!!!!!!
Thanks a ton!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless...
Press "Door Open"
- after the door opens perform the following sequence with the remote control:
a Region settings page will be displayed showing the current region on
the TV (usually the default is region 1), using the remote control select the region number by pressing the number on the remote (select region
0 for region free) and press OK.
error 61 on the nsm is a cd read error nothing to do with the amp, clean laser lens with a cotton bud and spit not spirits etc just saliva, then make a blank selection and see if the laser emits red beam, if not then the laser is faulty, check connections etc, if it picks up the disc but does not spin it its the decoder at fault, places like act marketing london, jukebox showroom, capital coin, herondata sales or anyone operator within the amusement industry will gladly sell you an exchange unit, or just try the coinslot industy magazine online or order via wh smiths
About the dvd error code C 31 00. I just found out and fixed the problem. You must open the top of the machine and move the white moving finger that picks the dvd/cd slot back into its origional place. Via a slot on the left side of the cd compartment about an inch in. The it will then properly pick the dvd/cd that you wish. You must also open each dvd/cd drive again so that your machine will know there is something in it. YOU ARE WELCOME