Question about RCA R52WH73 Projection Television

1 Answer

Hey!!!!! You seemed to know a lot about tv's and I don't know much at all I just bought a RCA R52WH74, 2 weeks ago, and was working perfectly. All of the sudden it went out of whack I got 3 colored lines on my screen, the picture is still there, but it is like in 3 D mode. If you have any advice on how to fix this it would be most appreciated. PLease please help. I don't have the money for a repairman, but I do not know how to even start repairing a tv myself. Thanks, Ben

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 8,617 Answers

Most likely cause is fuse FL231 on the deflection board is blown due to DL231 and CL230 needing replacement. You can get the parts at the following link with instructions on where they are located in the chassis. Heres the link look under the RCA Parts Category. http://servicemanuals.vstore.ca/

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'd like to know where I can get a replacement wire to connect the lamp ballast to the J4 input in my rca HD61LPW42 rear projection TV. I've gotten no response to an email I sent RCA a week ago. These...


hey mcd5brady, what was the solution to your last problem w the tv? ( replaced bulb and ballast but still no picture) my tv has same problem and dont know what to do next. any info on a solution would be greatly appreciated! post back or email. dellbino@aol.com
thanks

Jan 09, 2010 | RCA HD61LPW42 61" Rear Projection HDTV

3 Answers

My HDTV wont turn on, two weeks ago the colors blend together I wasen't able to adjuste the colors. then I turn it off and leave for two weeks. when I try to turn it on it wont turn on, the control panel...


It seems that you have an issue with the power board. You could also have faulty convergence modules causing the blending of colors.

I wouldn't advise you to open the set yourself, because of the complicated circuitry and high voltage. It is safest and best to get TV repairman to look at this issue and provide a fix/repair.

May 31, 2008 | RCA Televison & Video

1 Answer

Convergence issue-60 inch RCA projetion TV


it is under set up options in the menu

Oct 16, 2009 | Televison & Video

1 Answer

RCA P60921 60 in. Rear Projection not working


could be the flyback as some eat them depends on how old it is, and what model it is be more specific. also possible high voltage divider box

Nov 11, 2008 | RCA P60921 60" Rear Projection Television

1 Answer

Do we need a new TV?


I dont think this problem can be fixed without solder work or part replacement of convergence section. Its no just matter of fuse. You should get repair facility from concern service center because TV has dangrous voltages inside and qualified person knows how to deal with TV.

Jul 23, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Sony KDS-R50XBR1 9 red blinks


Isn't that the idicator telling you that its time to change the dlp lamp?

Jun 28, 2008 | Sony KDS-R50XBR1 50" HDTV

1 Answer

RCA 50" widescreen model M50WH74S Quit working


the deflection board put set into shut down,should be under warranty for service.

Aug 03, 2007 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Picture flickers, loses color, goes green, white, and negative, then TV turns off.


the unit has a bad color wheel.rca has seen this problem before.The color wheel has a bad bearing which over time can seize causing the single color you see.Keep on them they know it is defective

Mar 19, 2007 | RCA HD61LPW42 61" Rear Projection HDTV

1 Answer

Internal Cleaning Of MM52110


Really it all depends on how handy you are. Yes thes sets do have three lenses and a couple of mirrors that should be cleaned every year or two, and a few tweeks on the screens and focus controls. In my opinion, this should be done by someone who knows what they are doing. A TV set is not a place to be experimenting around inside of.

Sep 20, 2006 | RCA MM52110 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA R52WH73 Projection Television Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...