Question about American Pro Car Audio & Video

1 Answer

Trying to figure out what kind of amp i got amercian pro vs-3507?

I've got this amp coming and I was trying to figure out what kind it was. Wheather it's a mono amp ,are a channle ? And how to wire it for best sound.

Posted by on

  • Topspeed69 May 11, 2010

    In order for us to answer this, we need more info. Brand, Model of the amp. Also you can look the info up yourself with the name brand and model of the amp by googling it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The VS3507 Is a class D monoblock.
Your optimum wiring for this amplifier is a 2 Ohm load - so it produces its full potential power of 350W RMS.

To Achieve a 2 ohm load, the most common load is one of the following...
(1) Dual 4 Ohm Voicecoil Subwoofer Wired in Parallel.
(2) 4 Ohm Voicecoil Subwoofers wired in Parallel.
(1) Quad 2 Ohm Voicecoil Subwoofer wired in Parallel/Series.
(1) Single 2 Ohm voicecoil subwoofer.

American Pro VS3507 2000W Car Audio Monoblock Amplifier
American Pro VS3507 Monoblock Amplifier Details

  • Built-In Crossover
  • Variable High/Low Pass Filters
  • Phase Shift Control
  • Subsonic Filter
  • Bass Boost Control
  • Dancing Lights at the Rhythm of Music
  • Protection Circuits
  • Gold Plated Terminals
  • Power & Protection Circuit LED
  • 1 x 250 Watts RMS @ 4 Ohms
  • 1 x 350 Watts RMS @ 2 Ohms Thanks for using FixYa - A FixYa rating is appreciated!!

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much rms dose an american pro vs 1409 put out


I used to have a similar model, vs1405, and it was advertised to have 600w max. Its rms ratings were 260w bridged @ 4ohm. and 80x2 @ 4 ohm.
So I really wouldnt expect much.
I would personally suggest the HiFonics Brutus. Very nice amps for the price, and have TONS of power.

Oct 26, 2009 | American Pro Car Audio & Video

1 Answer

Not sound


The only thing I can think is the +/- on the speakers are backward or no signal from remote wire....
The green power light is on I presume?

Mar 05, 2009 | American Pro VS1404 Car Audio Amplifier

2 Answers

Amp Turns on Fine, but no Sound


have you checked the levels on the ohms? adjust them higher if need be contact me on yahoo msgr if you need more assistance

jcbproducts-always forward

ym-jcbproducts

Nov 14, 2008 | American Pro VS-2043 Car Audio Amplifier

1 Answer

OVERHEAT PROTECTION


The thermal protection would have reset when the amp cooled down. When cool, if it still goes into protection when it powers up, there are likely blown output transistors. To be sure it's not a wiring problem, disconnect the speaker wires 'from the terminal block of the amp' and disconnect the RCA cables from it. If it still goes into protection, the output transistors are almost certainly shorted.

Sep 09, 2007 | American Pro VS-2043 Car Audio Amplifier

1 Answer

WHEN I HOOK UP THE AMP


Check your speaker connections and the try to power the unit on again. I fear that you may have damaged the power amplifier MOSFETs on the output stage. This is what this sounds like. I would first try to see if audio is going into the unit by using an oscilloscope and taking a reading at the input of the amplifier. If audio is preset I would take the unit to a shop since there are no user serviceable parts inside of this device. Look for a shop that will give you a free estimate. I do feel that you have internal damage to that device.

Sep 03, 2007 | American Pro VS-2043 Car Audio Amplifier

1 Answer

American pro amp 1000 watt vs=3503


The Protect light would normally be Red. You need to test your RCA's and make sure your getting a signal to your amp.  I would just buy a new set  or if you have another set just try them.  If you get your amp to power on and all of your voltages are right with the proper signal and your amp fails to turn on you Have a bad amplifier

Aug 30, 2007 | Kenwood KAC-9104D Car Audio Amplifier

1 Answer

Orion XTR Pro 1000 amp ticking


the amplifier output transistor or ic may be damage, its the relay may be thats ticking, or if not the output going to the speaker may be shorted or overloaded with low impedance, you may remove some speaker and try again.

May 18, 2007 | Orion XTR Pro 1000 Car Audio Amplifier

1 Answer

Amp protection mode


Try swapping the "bad" fuses for the "good" ones and see if that helps. That will tell you if the fuses are the problem. I doubt that is the problem. You never said what kind of problem you were having with the left speaker. If your friend dropped a drink into the amp then I would discontinue using it until it was checked out and don't be surprised if you have one channel that has some parts that need replacing, like some of the output transistors/MOSFET's. That might explain why your fuses appear to be melted. Maybe they are. In any case, get someone who knows what they are looking at to have a look see at your amp.

Jan 17, 2007 | Pyle PT-3200 Amplifier Car Audio Amplifier

1 Answer

How to fix my amer.pro1000watt amp which has a burnt fuse an doesnt put out music


You blew the output transistors. They all need to be replaced. Check this for more info: http://www.techlore.com/article/14696/

Aug 14, 2006 | American Pro VS-2043 Car Audio Amplifier

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top American Pro Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you an American Pro Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...