Question about Blueant Z9 Wireless Headset

1 Answer

Pairing z9 i have tryed many times to get my bleuant z9 to pair with my ophone 3g it is the 16 gig phone

Posted by on

  • Antriksh Yadav May 11, 2010

    So what happens? Please tell clearly.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

Pairing Procedure
This is an example only and may differ from your phone, but the process will be the same.

With the Z9 OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start flashing. The Z9 is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.

Perform a Bluetooth device discovery on your mobile phone to add a new device.

Enter Passkey "0000" when your phone prompts you. The phone and Z9 will now Pair

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I first bought the product I had no problem pairing it with my 16 gig iPhone. Since replacing that phone with the 32 gig iPhone I have been unable to pair the plantronics K100 with my new phone. Why...


One possibility: If your new phone is paired but not connected because the K100 is looking for the old phone. When powering on the K100 it searches for the last connected cell phone. If the last connected phone is not within range, or the Bluetooth feature is turned off on the phone (which hopefully the first iPhone is turned off or at least out of range), then another phone within range that has been previously paired with the speakerphone can be connected by tapping the Multi-function button.

For additional help, Plantronics K100 Users Guide

Good Luck from Headsets Direct!

Jun 14, 2011 | Plantronics K100 Bluetooth Headset

1 Answer

Cannot pair my iphone with blueant


The typical setup with a Bluetooth is press whatever the main button on the device is until there is a glowing blue light (usually about 3-6 seconds). You then need to go to the Bluetooth menu on the phone (under settings). Select scan for devices. After a few seconds, you should see Blueant Z9. Select it. it will then ask for pin to pair device. It should be either 0000 or 1234. After that, you should be all done.

May 04, 2011 | Blueant Z9 Wireless Headset

1 Answer

Clear memory on blue ant z9


  1. To reset your Z9i it must be switched on but not connected to any devices.
  2. You should already have deleted the pairing information from your phone, but if you have not, use your phone's Bluetooth menu to disconnect from the Z9i and delete the pairing information.
  3. Now reset the Z9i by holding down "Vol +" and "Vol -" and then clicking the BlueAnt button.
  4. The Z9i will refresh its memory, delete all current pairing information and automatically go into pairing mode.

Mar 02, 2011 | Blueant Z9i Bluetooth Headset

1 Answer

Im trying to pair my iphone with my blueant but it keeps saying (make sure blueant st3 is turned on in range and ready to pair)


First off the device you are referring to is a ST3 and not a Z9. What you need to do is put the device into pair mode prior to searching in your iphones bluetooth menu, to do this with the device off hold down the green button until you hear a language loop. When you hear the language of your choice let go of the green button and press it once right away. You will hear a message about your phones bluetooth menu, when you hear that go to your Iphones bluetooth menu and select the ST3 and it should work.

Regards,

Rylan

Dec 04, 2010 | Blueant Z9 Wireless Headset

1 Answer

Blackberry 9700 cannot find blueantz91


Try resetting the Z9. With the device powered on, press the vol -/+ and MFB all at the exact same time. Ensure the buttons are not held, simply clicked all at once like a mouse to a computer. Once you get a consistent rapid flash the device has been reset and will go automatically into pair mode, it should now show up when you search for it in your phones bluetooth menu.

Rylan

Jan 08, 2010 | Blueant Z9 Wireless Headset

1 Answer

Can't pair Z9 with my blackberry 8120


Turn off your Z9
Turn the bluetooth feature ON on your 8120
Start the search for the bluetooth device
When the search starts, press and hold your ANT logo-button for about 6 seconds on your Z9.
First it will light up blue then starts flashing continuously.
Your phone should find it now with no problem!
Good Luck!

Sep 24, 2009 | Blueant Z9i Bluetooth Headset

2 Answers

BlueAnt pairing with iphone...help


Just got off the phone with Apple and Blue Ant tech support.

If everything is workon g on both devices you probably need a memory dump on your headset.

1. Power off both devises
2. Power on iphone
3. Power on blue Ant - not in pairing mode - you should see 1 blue blinking light on MFB
4. Make sure iphone bluetooth is on and searching for devices
5. On Blue Ant, hold both volume buttons and MFB at the same time until you get a fast blinking blue light.
6. Check iphone it should now recognize device.
7. When Blue Ant shows up on phone press it so it completes the pairing priocess

Good luck!

Jun 24, 2009 | Blueant Z9 Wireless Headset

1 Answer

My bluetooth wont connect to my phone. ive connected it b4. you jus hold dwn the button until it flashes a few times to pair but its not workin. knw where i can find a users manual on line?


I GOT THE ANSWER FROM ANOTHER Z9 ISSUE RAISED BY SOMEONE.
HOLD THE RED BUTTON FOR A WHILE WHILE KEEPING THE NEW DEVICE IN BLUE TOOTH SEARCH MODE. THE BLUE LIGHT IN BA STAYS STEADY AND TELEPHONE DEVICE PICKED UP THE SIGNAL . PAIRING WAS DONE AS DIRECTED BY PHONE DEVICE.

Apr 28, 2009 | Blueant Z9 Wireless Headset

1 Answer

I cannot remember how to pair BlueAnt bluetooth to new devices


You will need to set the Z9 into pairing mode before your iPhone will find it.

The manual for the z9 is here

With the Z9 OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start flashing. The Z9 is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.

Enter Passkey "0000" when your phone prompts you. The phone and Z9 will now Pair.

Mar 10, 2009 | Blueant Z9 Wireless Headset

1 Answer

I am trying to pair my z9 with my nokia n95


  1. Delete the old Z9 pairing
  2. With the Z9 OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start flashing. The Z9 is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes
  3. Enter Passkey "0000" when your phone prompts you. The phone and Z9 will now Pair

I hope that helped.

Feb 28, 2009 | Blueant Z9 Wireless Headset

Not finding what you are looking for?
Blueant Z9 Wireless Headset Logo

Related Topics:

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blueant Headsets Experts

Iron
Iron

Level 3 Expert

3018 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

aliasger yq

Level 2 Expert

213 Answers

Are you a Blueant Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...