Question about Kenmore 94702 Front Load Stacked Washer / Dryer

1 Answer

Spin cycle won't stop

Continues to spin unless I move the nob to the next cycle.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to trouble shoot maytag timer nob


There is still water in the machine , the pressure sensor my not be operating there is a loose contact in the motor spin winding or the timer no supply voltage is going to the motor check the votlage at the motor at spin cycle

Sep 20, 2012 | Maytag SAV3710AWW Washer

1 Answer

I have a problem with my hotpoint wf340 1400 spin when i put it on it washes but wont come off the wash cycle and will continue washing unless i stop it manually i then have to select pump out and then a...


it is either a broken wire to your heating element or the element itself is open circuit. when the water does not heat the machine will not move onto next stage of wash.

Feb 20, 2011 | Hotpoint Washing Machines

1 Answer

Machine fills rinses and stops before drain and spin


Sounds like your timer is not moving the gears to the next cycle.

May 18, 2009 | Washing Machines

1 Answer

Noise when stopping after spin cycle or open lid (after moving)


check hub nut, it is likely loose, its under the agitator. top pops off agitator and bolt hold agitator down.

Jan 04, 2009 | Whirlpool Inglis IP4400 Washer

1 Answer

Washer fills but won t advance to the next setting for all cycle


Do you hear the ticking of the dial moving? if so it could be that the points aren't getting connection to cycle it threw the various cycles

Nov 22, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer won't move into spin phase on the Regular Cycle setting.


Have you checked the lid switch??? This will prevent it from spinning look on the lid you will see a plunger.. watch where it goes down to you can use a pen to press the sw while the lid is up to see if it is working ...PS: dont forget to set it into the spin cycle first..let me know what happens

Feb 16, 2008 | Whirlpool LSR6232J Top Load Washer

Not finding what you are looking for?
Kenmore 94702 Front Load Stacked Washer / Dryer Logo

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...